|
|
|
National Stock Number:
5315-01-148-3729
Federal Supply Class:
5315
National Item Identification Number:
011483729
Description:
PIN,STRAIGHT,HEADLESS
Detail:
A headless, cylindrically-shaped item having a straight, smooth, solid body, with or without a drilled hole(s). It has an outside diameter equal to or less than its length. Its length must not exceed twelve inches (304 MM); for items whose length exceeds twelve inches (304 MM); see ROD, STRAIGHT, HEADLESS. It is used for aligning or transfer of torque and/or thrust, by fitting into corresponding holes of another item. See also PIN, STRAIGHT, THREADED.
|
Manufacturer Information:
| 1609235-2 | 10001 | NAVAIR AND NAVSEA MANAGED ORIGINAL DESIGN ACTIVITY DWG NOT MATERIAL/PARTS SUPPLIER | | 5315PL0914877 | 9009H | INSPEKTORAT WSPARCIA SIL ZBROJNYCH |
|
Techincal Specification:
| FIRST END STYLE | CHAMFERED | | FIRST END TAPER ANGLE | 5.0 DEGREES MINIMUM AND 10.0 DEGREES MAXIMUM | | HARDNESS RATING | 60.0 ROCKWELL C MINIMUM AND 62.0 ROCKWELL C MAXIMUM OVERALL | | MATERIAL | STEEL OVERALL | | PIN OVERALL DIAMETER | 0.1251 INCHES MINIMUM AND 0.1253 INCHES MAXIMUM | | PIN OVERALL LENGTH | 0.500 INCHES NOMINAL | | SECOND END CORNER RADIUS | 0.046 INCHES NOMINAL | | SECOND END RELATIONSHIP WITH FIRST END | NOT IDENTICAL | | SECOND END STYLE | RADIUS | | SHEAR STRENGTH | 144000 SINGLE POUNDS PER SQUARE INCH | | SURFACE FINISH | 32.0 MICROINCHES OUTSIDE DIAMETER | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | DOD-P-16232 TYPE M,CLASS 1 MIL SPEC 1ST TREATMENT RESPONSE AND MIL-C-16173 GRADE 4 MIL SPEC 2ND TREATMENT RESPONSE OR MIL-C-13924 CLASS 1 MIL SPEC 3RD TREATMENT RESPONSE OVERALL | | SURFACE TREATMENT | PHOSPHATE MANGANESE AND LUBRICANT OR OXIDE OVERALL |
|
|