|
|
|
National Stock Number:
5315-01-154-1523
Federal Supply Class:
5315
National Item Identification Number:
011541523
Description:
PIN,STRAIGHT,HEADLESS
Detail:
A headless, cylindrically-shaped item having a straight, smooth, solid body, with or without a drilled hole(s). It has an outside diameter equal to or less than its length. Its length must not exceed twelve inches (304 MM); for items whose length exceeds twelve inches (304 MM); see ROD, STRAIGHT, HEADLESS. It is used for aligning or transfer of torque and/or thrust, by fitting into corresponding holes of another item. See also PIN, STRAIGHT, THREADED.
|
Manufacturer Information:
| 196B7638-10 | 05606 | GENERAL DYNAMICS-OTS, INC. |
|
Techincal Specification:
| DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | 2.040 INCHES MINIMUM AND 2.080 INCHES MAXIMUM | | FIRST HOLE DIAMETER | 0.126 INCHES MINIMUM AND 0.129 INCHES MAXIMUM | | FIRST END STYLE | CHAMFERED | | FIRST END TAPER LENGTH | 0.280 INCHES MINIMUM AND 0.340 INCHES MAXIMUM | | HOLE ARRANGEMENT STYLE | ONE END DRILLED | | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5643,17-4 ASSN STD SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | STEEL COMP 631 OVERALL | | PIN OVERALL DIAMETER | 0.4970 INCHES MINIMUM AND 0.4980 INCHES MAXIMUM | | PIN OVERALL LENGTH | 2.190 INCHES MINIMUM AND 2.270 INCHES MAXIMUM | | PRECIOUS MATERIAL AND LOCATION | EXTERNAL SURFACES SILVER | | SECOND END RELATIONSHIP WITH FIRST END | NOT IDENTICAL | | SECOND END STYLE | SQUARE | | SURFACE FINISH | 63.0 MICROINCHES OUTSIDE DIAMETER | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-N-290 FED SPEC 1ST TREATMENT RESPONSE AND MIL-STD-171,1.7.1 MIL STD 2ND TREATMENT RESPONSE OVERALL | | SURFACE TREATMENT | NICKEL AND SILVER OVERALL |
|
|