|
|
|
National Stock Number:
5315-01-155-3165
Federal Supply Class:
5315
National Item Identification Number:
011553165
Description:
PIN,STRAIGHT,HEADED
Detail:
A headed, cylindrically-shaped item having a solid shank for fitting into corresponding holes, used for aligning or fastening. It may have welding projections. It also may contain holes drilled perpendicular to axial centerline. Excludes PIN, ECCENTRIC.
|
Manufacturer Information:
| 196B8637-2 | 05606 | GENERAL DYNAMICS-OTS, INC. |
|
Techincal Specification:
| UNDER HEAD LENGTH | 1.660 INCHES MINIMUM AND | | 1.700 INCHES MAXIMUM | | DIAMETER | 0.2489 INCHES MINIMUM AND | | 0.2495 INCHES MAXIMUM | | HEAD STYLE | FLAT CHAMFER | | STYLE DESIGNATOR | STRAIGHT | | MATERIAL | STEEL COMP 4140 OVERALL | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-624 COLD FINISHED FED SPEC SINGLE MATERIAL RESPONSE OVERALL | | SURFACE TREATMENT | PHOSPHATE AND | | CADMIUM OVERALL | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-STD-171,5.3.1.3 MIL STD 1ST TREATMENT RESPONSE AND | | MIL-STD-171,1.1.2.2 MIL STD 2ND TREATMENT RESPONSE OVERALL | | HARDNESS RATING | 30.0 ROCKWELL C MINIMUM AND | | 35.0 ROCKWELL C MAXIMUM OVERALL | | CHAMFER LENGTH | 0.010 INCHES MINIMUM AND | | 0.030 INCHES MAXIMUM | | PIN CHAMFER ANGLE | 45.0 DEGREES NOMINAL | | PIN HEAD DIAMETER | 0.360 INCHES MINIMUM AND | | 0.400 INCHES MAXIMUM | | HEIGHT | 0.050 INCHES MINIMUM AND | | 0.070 INCHES MAXIMUM | | HOLE ARRANGEMENT STYLE | ONE END DRILLED | | FIRST HOLE DIAMETER | 0.091 INCHES MINIMUM AND | | 0.101 INCHES MAXIMUM | | DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | 1.090 INCHES MINIMUM AND | | 1.110 INCHES MAXIMUM | | SURFACE FINISH | 125.0 MICROINCHES OVERALL | | THE MANUFACTURERS DATA | | | MANUFACTURERS CODE | 05606 | | DESIGN CONTROL REFERENCE | 196B8637-2 |
|
|