|
|
|
National Stock Number:
5315-01-157-0963
Federal Supply Class:
5315
National Item Identification Number:
011570963
Description:
PIN,SHOULDER,HEADLESS
Detail:
A cylindrically-shaped headless item, having a shank at one or both ends. It is used for aligning, fastening, or transfer of torque and/or thrust by fitting into corresponding holes of another item. It may be threaded on one end.
|
Manufacturer Information:
| 4674790 ITEM 13 | 53711 | NAVAL SEA SYSTEMS COMMAND | | 4674790-13 | 96169 | ELECTRIC BOAT CORPORATION | | 87624-505 ITEM 13 | 96169 | ELECTRIC BOAT CORPORATION |
|
Techincal Specification:
| FIRST END STYLE | CHAMFERED | | FIRST END TAPER ANGLE | 45.0 DEGREES NOMINAL | | FIRST END TAPER LENGTH | 0.045 INCHES NOMINAL | | FIRST END LOCATION | THREADED END | | FIRST STEP DIAMETER | 0.558 INCHES MINIMUM AND 0.560 INCHES MAXIMUM | | FIRST STEP LENGTH | 2.380 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-763 COND B FED SPEC SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | STEEL COMP 304 OVERALL | | NOMINAL THREAD SIZE | 0.250 INCHES | | SECOND END OUTER RADIUS | 0.280 INCHES NOMINAL | | SECOND END RELATIONSHIP WITH FIRST END | NOT IDENTICAL | | SECOND END STYLE | ROUND | | SECOND STEP LENGTH | 2.370 INCHES NOMINAL | | SECOND STEP DIAMETER | 0.308 INCHES MINIMUM AND 0.310 INCHES MAXIMUM | | STYLE DESIGNATOR | SHOULDER | | SURFACE FINISH | 63.0 MICROINCHES ROUND END | | SURFACE FINISH | 63.0 MICROINCHES OUTSIDE DIAMETER | | THIRD STEP DIAMETER | 0.245 INCHES MINIMUM AND 0.250 INCHES MAXIMUM | | THIRD STEP LENGTH | 0.940 INCHES NOMINAL | | THREAD CLASS | 2A | | THREAD DIRECTION | RIGHT-HAND | | THREAD LENGTH | 0.560 INCHES NOMINAL | | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL COARSE (UNC) |
|