|
|
|
National Stock Number:
5315-01-157-4911
Federal Supply Class:
5315
National Item Identification Number:
011574911
Description:
PIN,STRAIGHT,HEADLESS
Detail:
A headless, cylindrically-shaped item having a straight, smooth, solid body, with or without a drilled hole(s). It has an outside diameter equal to or less than its length. Its length must not exceed twelve inches (304 MM); for items whose length exceeds twelve inches (304 MM); see ROD, STRAIGHT, HEADLESS. It is used for aligning or transfer of torque and/or thrust, by fitting into corresponding holes of another item. See also PIN, STRAIGHT, THREADED.
|
Manufacturer Information:
| 196B8829 | 05606 | GENERAL DYNAMICS-OTS, INC. |
|
Techincal Specification:
| CENTER TO CENTER DISTANCE BETWEEN HOLES | 1.907 INCHES NOMINAL | | DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | 0.145 INCHES MINIMUM AND 0.165 INCHES MAXIMUM | | FIRST END STYLE | CHAMFERED | | FIRST END TAPER ANGLE | 13.0 DEGREES MINIMUM AND 17.0 DEGREES MAXIMUM | | FIRST HOLE DIAMETER | 0.102 INCHES MINIMUM AND 0.112 INCHES MAXIMUM | | HOLE ARRANGEMENT STYLE | BOTH END DRILLED | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-763 COND A FED SPEC ALL MATERIAL RESPONSES OVERALL | | MATERIAL | STEEL COMP 316L OR STEEL COMP 316 OVERALL | | PIN OVERALL DIAMETER | 0.3100 INCHES MINIMUM AND 0.3120 INCHES MAXIMUM | | PIN OVERALL LENGTH | 2.218 INCHES MINIMUM AND 2.228 INCHES MAXIMUM | | SECOND HOLE DIAMETER | 0.102 INCHES MINIMUM AND 0.112 INCHES MAXIMUM | | SECOND END RELATIONSHIP WITH FIRST END | IDENTICAL | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-STD-171 5.4.1 MIL STD SINGLE TREATMENT RESPONSE OVERALL | | SURFACE TREATMENT | PASSIVATE OVERALL |
|
|