| MATERIAL | NICKEL ALLOY OVERALL |
| MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5663 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| STYLE DESIGNATOR | SHOULDER |
| SHOULDER WIDTH ACROSS FLATS | 0.546 INCHES NOMINAL |
| OVERALL LENGTH | 1.585 INCHES MINIMUM AND |
| 1.615 INCHES MAXIMUM |
| FIRST STEP DIAMETER | 0.600 INCHES MINIMUM AND |
| 0.620 INCHES MAXIMUM |
| FIRST STEP LENGTH | 0.038 INCHES MINIMUM AND |
| 0.042 INCHES MAXIMUM |
| SECOND STEP DIAMETER | 0.5459 INCHES MINIMUM AND |
| 0.5461 INCHES MAXIMUM |
| SECOND STEP LENGTH | 0.620 INCHES MINIMUM AND |
| 0.640 INCHES MAXIMUM |
| THIRD STEP DIAMETER | 0.4722 INCHES MINIMUM AND |
| 0.4820 INCHES MAXIMUM |
| THIRD STEP LENGTH | 0.500 INCHES MINIMUM AND |
| 0.540 INCHES MAXIMUM |
| FIRST END STYLE | CHAMFERED |
| FIRST END TAPER LENGTH | 0.040 INCHES MINIMUM AND |
| 0.060 INCHES MAXIMUM |
| FIRST END TAPER ANGLE | 28.0 DEGREES MINIMUM AND |
| 32.0 DEGREES MAXIMUM |
| SECOND END RELATIONSHIP WITH FIRST END | NOT IDENTICAL |
| SECOND END STYLE | COUNTERBORED W/O THRU HOLE |
| SECOND END COUNTERBORE DIAMETER | 0.323 INCHES MINIMUM AND |
| 0.333 INCHES MAXIMUM |
| SECOND END COUNTERBORE DEPTH | 0.940 INCHES MINIMUM AND |
| 0.960 INCHES MAXIMUM |
| FIRST END LOCATION | CHAMFERED END |
| SPECIAL FEATURES | DIA OF SHANK OPPOSITE CBORE IS 0.4362 MIN,0.4364 MAX; BOTH FIRST AND SECOND STEP DIAMETERS ARE FINISHED TO ASLIGHTLY SMALLER DIAMETER FOR PART OF THEIR LENGTH |
| CRITICALITY CODE JUSTIFICATION | FEAT |
| THE MANUFACTURERS DATA | |
| MANUFACTURERS CODE | 77445 |
| DESIGN CONTROL REFERENCE | 4055275 |