|
|
|
National Stock Number:
5315-01-162-4811
Federal Supply Class:
5315
National Item Identification Number:
011624811
Description:
PIN,STRAIGHT,KNURLED
Detail:
A HEADLESS, CYLINDRICALLY-SHAPED, STRAIGHT, SOLID ITEM WITH OR WITHOUT A DRILLED HOLE(S). IT HAS A STRAIGHT OR DIAMOND KNURL. ITS LENGTH MUST NOT EXCEED 12 INCHES (304 MM). IT IS USED FOR ALIGNING OR TRANSFER OF TORQUE AND/OR THRUST, BY FITTING INTO CORRESPONDING HOLES OF ANOTHER ITEM.
|
Manufacturer Information:
| 74D751005-2065 | 76301 | THE BOEING COMPANY |
|
Techincal Specification:
| MATERIAL | STEEL COMP 303 OVERALL | | MATERIAL DOCUMENT AND CLASSIFICATION | ASTM A582 ASSN STD SINGLE MATERIAL RESPONSE OVERALL | | STYLE DESIGNATOR | DIAMOND KNURLED | | OVERALL LENGTH | 7.380 INCHES NOMINAL | | DIAMETER | 1.240 INCHES MINIMUM AND | | 1.245 INCHES MAXIMUM | | KNURL LENGTH | 1.000 INCHES NOMINAL | | FIRST END STYLE | CHAMFERED | | FIRST END TAPER LENGTH | 0.120 INCHES NOMINAL | | FIRST END TAPER ANGLE | 43.0 DEGREES MINIMUM AND | | 47.0 DEGREES MAXIMUM | | SECOND END RELATIONSHIP WITH FIRST END | NOT IDENTICAL | | SECOND END STYLE | ROUND | | SECOND END OUTER RADIUS | 0.6200 INCHES MINIMUM AND | | 0.6225 INCHES MAXIMUM | | HOLE ARRANGEMENT STYLE | BOTH END DRILLED | | FIRST HOLE DIAMETER | 0.257 INCHES MINIMUM AND | | 0.264 INCHES MAXIMUM | | SECOND HOLE DIAMETER | 0.257 INCHES MINIMUM AND | | 0.264 INCHES MAXIMUM | | DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | 3.188 INCHES NOMINAL | | CENTER TO CENTER DISTANCE BETWEEN HOLES | 1.812 INCHES NOMINAL | | SPECIAL FEATURES | 0.380 IN. RADIUS GROOVE TO 0.750 IN. DIA TO CREATE SPHERICAL END; SLOT 0.200 IN. W,0.360 IN. DP AND 2.012 IN. LG CENTERED PERPENDICULAR TO 2 HOLES IN PIN | | THE MANUFACTURERS DATA | | | MANUFACTURERS CODE | 76301 | | DESIGN CONTROL REFERENCE | 74D751005-2065 |
|
|