|
|
|
National Stock Number:
5315-01-162-6056
Federal Supply Class:
5315
National Item Identification Number:
011626056
Description:
PIN,STRAIGHT,HEADLESS
Detail:
A headless, cylindrically-shaped item having a straight, smooth, solid body, with or without a drilled hole(s). It has an outside diameter equal to or less than its length. Its length must not exceed twelve inches (304 MM); for items whose length exceeds twelve inches (304 MM); see ROD, STRAIGHT, HEADLESS. It is used for aligning or transfer of torque and/or thrust, by fitting into corresponding holes of another item. See also PIN, STRAIGHT, THREADED.
|
Manufacturer Information:
| 160-7818 | 11083 | CATERPILLAR INC | | 3P3880 | 11083 | CATERPILLAR INC |
|
Techincal Specification:
| DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | 2.220 INCHES MINIMUM AND 3.280 INCHES MAXIMUM | | FEATURES PROVIDED | CASEHARDENED | | FIRST END COUNTERSINK ANGLE | 60.0 DEGREES NOMINAL | | FIRST END COUNTERSINK DIAMETER | 0.438 INCHES NOMINAL | | FIRST HOLE DIAMETER | 0.188 INCHES NOMINAL | | FIRST END STYLE | COUNTERSUNK | | HOLE ARRANGEMENT STYLE | ONE END DRILLED | | PIN OVERALL DIAMETER | 1.4400 INCHES MINIMUM AND 1.4440 INCHES MAXIMUM | | PIN OVERALL LENGTH | 8.090 INCHES MINIMUM AND 8.150 INCHES MAXIMUM | | MATERIAL | STEEL OVERALL | | SECOND END COUNTERSINK ANGLE | 60.0 DEGREES NOMINAL | | SECOND END COUNTERSINK DIAMETER | 0.716 INCHES NOMINAL | | SECOND END STYLE | CHAMFERED AND COUNTERSUNK | | SECOND END TAPER ANGLE | 7.0 DEGREES NOMINAL | | SECOND END TAPER LENGTH | 0.190 INCHES NOMINAL | | SECOND END RELATIONSHIP WITH FIRST END | NOT IDENTICAL |
|
|