|
|
|
National Stock Number:
5315-01-170-3209
Federal Supply Class:
5315
National Item Identification Number:
011703209
Description:
PIN,STRAIGHT,HEADLESS
Detail:
A headless, cylindrically-shaped item having a straight, smooth, solid body, with or without a drilled hole(s). It has an outside diameter equal to or less than its length. Its length must not exceed twelve inches (304 MM); for items whose length exceeds twelve inches (304 MM); see ROD, STRAIGHT, HEADLESS. It is used for aligning or transfer of torque and/or thrust, by fitting into corresponding holes of another item. See also PIN, STRAIGHT, THREADED.
|
Manufacturer Information:
| 219T534 | 27315 | MORRIS MATERIAL HANDLING, INC. |
|
Techincal Specification:
| MATERIAL | STEEL OVERALL | | MATERIAL DOCUMENT AND CLASSIFICATION | P&H 97,FSCM 27315 MFR REF SINGLE MATERIAL RESPONSE OVERALL | | FIRST END STYLE | CHAMFERED | | FIRST END TAPER LENGTH | 0.125 INCHES NOMINAL | | FIRST END TAPER ANGLE | 30.0 DEGREES NOMINAL | | SECOND END RELATIONSHIP WITH FIRST END | IDENTICAL | | HOLE ARRANGEMENT STYLE | BOTH END DRILLED | | FIRST HOLE DIAMETER | 0.3440 INCHES NOMINAL | | SECOND HOLE DIAMETER | 0.3440 INCHES NOMINAL | | DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | 0.335 INCHES MINIMUM AND | | 0.415 INCHES MAXIMUM | | CENTER TO CENTER DISTANCE BETWEEN HOLES | 11.022 INCHES MINIMUM AND | | 11.102 INCHES MAXIMUM | | SURFACE FINISH | 32.0 MICROINCHES OUTSIDE DIAMETER | | PIN OVERALL LENGTH | 11.752 INCHES MINIMUM AND | | 11.872 INCHES MAXIMUM | | PIN OVERALL DIAMETER | 1.7494 INCHES MINIMUM AND | | 1.7504 INCHES MAXIMUM | | SPECIAL FEATURES | PIN TO BE ROCKWELL HARDENED 58.0 MIN,9.750 IN. FROM EACH END | | THE MANUFACTURERS DATA | | | MANUFACTURERS CODE | 27315 | | DESIGN CONTROL REFERENCE | 219T534 |
|
|