|
|
|
National Stock Number:
5315-01-170-4687
Federal Supply Class:
5315
National Item Identification Number:
011704687
Description:
PIN,STRAIGHT,HEADED
Detail:
A headed, cylindrically-shaped item having a solid shank for fitting into corresponding holes, used for aligning or fastening. It may have welding projections. It also may contain holes drilled perpendicular to axial centerline. Excludes PIN, ECCENTRIC.
|
Manufacturer Information:
| 2689308 | 10001 | NAVAIR AND NAVSEA MANAGED ORIGINAL DESIGN ACTIVITY DWG NOT MATERIAL/PARTS SUPPLIER |
|
Techincal Specification:
| UNDER HEAD LENGTH | 3.406 INCHES NOMINAL | | DIAMETER | 0.498 INCHES MINIMUM AND | | 0.499 INCHES MAXIMUM | | HEAD STYLE | ROUND W/WRENCH FLATS | | STYLE DESIGNATOR | STRAIGHT | | MATERIAL | STEEL COMP 4140 OVERALL | | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-C-6021,CL 2B GR D MIL SPEC SINGLE MATERIAL RESPONSE OR | | MIL-S-22141 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL | | SURFACE TREATMENT | PHOSPHATE MANGANESE AND | | LUBRICANT OVERALL | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | DOD-P-16232,TY M CL 3 MIL SPEC 1ST TREATMENT RESPONSE AND | | MIL-L-46010 MIL SPEC 2ND TREATMENT RESPONSE OVERALL | | HARDNESS RATING | 38.0 ROCKWELL C MINIMUM AND | | 42.0 ROCKWELL C MAXIMUM OVERALL | | CHAMFER LENGTH | 0.031 INCHES NOMINAL | | SLOT WIDTH | 0.190 INCHES MINIMUM AND | | 0.200 INCHES MAXIMUM | | SLOT LENGTH | 0.812 INCHES NOMINAL | | PIN CHAMFER ANGLE | 45.0 DEGREES NOMINAL | | WIDTH ACROSS FLATS | 0.750 INCHES NOMINAL | | PIN HEAD DIAMETER | 1.625 INCHES NOMINAL | | HEIGHT | 0.250 INCHES NOMINAL | | HOLE ARRANGEMENT STYLE | ONE END DRILLED | | FIRST HOLE DIAMETER | 0.188 INCHES MINIMUM AND | | 0.189 INCHES MAXIMUM | | DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | 0.250 INCHES NOMINAL | | SURFACE FINISH | 63.0 MICROINCHES OUTSIDE DIAMETER | | SPECIAL FEATURES | FULL RADIUS ON HEAD BOTH ENDS,TWO SYMMETRICAL FLATS 0.438 IN. O/A W 0.812 IN NOM LG,0.062 IN. W 0.469 IN. DIA GROOVE ON SHANK ADJACENT TO THE HEAD |
|
|