|
|
|
National Stock Number:
5315-01-172-2834
Federal Supply Class:
5315
National Item Identification Number:
011722834
Description:
PIN,STRAIGHT,HEADED
Detail:
A headed, cylindrically-shaped item having a solid shank for fitting into corresponding holes, used for aligning or fastening. It may have welding projections. It also may contain holes drilled perpendicular to axial centerline. Excludes PIN, ECCENTRIC.
|
Manufacturer Information:
| 13A1248-1 | 07RP9 | JOINT OIL ANALYSIS PROGRAM DBA DEPARTMENT OF DEFENSE | | 13A1248-1 | 96916 | FLEET READINESS CENTER EAST DIV DEPARTMENT OF NAVY | | 13C1215-1 | 07RP9 | JOINT OIL ANALYSIS PROGRAM DBA DEPARTMENT OF DEFENSE | | 13C1215-1 | 96916 | FLEET READINESS CENTER EAST DIV DEPARTMENT OF NAVY |
|
Techincal Specification:
| UNDER HEAD LENGTH | 5.155 INCHES NOMINAL | | DIAMETER | 0.088 INCHES MINIMUM AND | | 0.090 INCHES MAXIMUM | | HEAD STYLE | WEATHERTIGHT | | STYLE DESIGNATOR | STRAIGHT | | MATERIAL | STEEL COMP 302 OVERALL | | MATERIAL DOCUMENT AND CLASSIFICATION | ASTM A313 ASSN STD 1ST MATERIAL RESPONSE OVERALL | | SURFACE TREATMENT | CADMIUM OVERALL | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TYPE 2,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL | | CHAMFER LENGTH | 0.015 INCHES NOMINAL | | PIN CHAMFER ANGLE | 45.0 DEGREES NOMINAL | | PIN HEAD DIAMETER | 0.200 INCHES NOMINAL | | HEIGHT | 0.125 INCHES NOMINAL | | HOLE ARRANGEMENT STYLE | ONE END DRILLED | | FIRST HOLE DIAMETER | 0.040 INCHES NOMINAL | | DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | 0.151 INCHES NOMINAL | | THE MANUFACTURERS DATA | | | MANUFACTURERS CODE | 96916 | | DESIGN CONTROL REFERENCE | 13C1215-1 |
|
|