|
|
|
National Stock Number:
5315-01-175-3910
Federal Supply Class:
5315
National Item Identification Number:
011753910
Description:
PIN,STRAIGHT,HEADED
Detail:
A headed, cylindrically-shaped item having a solid shank for fitting into corresponding holes, used for aligning or fastening. It may have welding projections. It also may contain holes drilled perpendicular to axial centerline. Excludes PIN, ECCENTRIC.
|
Manufacturer Information:
| 9942M96P01 | 07482 | GENERAL ELECTRIC COMPANY |
|
Techincal Specification:
| MANUFACTURERS CODE | 07482 | | DESIGN CONTROL REFERENCE | 9942M96P01 | | UNDER HEAD LENGTH | 0.500 INCHES MINIMUM AND | | 0.520 INCHES MAXIMUM | | DIAMETER | 0.246 INCHES MINIMUM AND | | 0.248 INCHES MAXIMUM | | HEAD STYLE | ROUND W/WRENCH FLATS | | STYLE DESIGNATOR | STRAIGHT | | MATERIAL | COBALT ALLOY OVERALL | | MATERIAL DOCUMENT AND CLASSIFICATION | B50TF74 CL-A,07482 MFR REF SINGLE MATERIAL RESPONSE OVERALL | | CHAMFER LENGTH | 0.020 INCHES MINIMUM AND | | 0.040 INCHES MAXIMUM | | PIN CHAMFER ANGLE | 45.0 DEGREES NOMINAL | | WIDTH ACROSS FLATS | 0.290 INCHES MINIMUM AND | | 0.310 INCHES MAXIMUM | | PIN HEAD DIAMETER | 0.400 INCHES MINIMUM AND | | 0.420 INCHES MAXIMUM | | HEIGHT | 0.055 INCHES MINIMUM AND | | 0.065 INCHES MAXIMUM | | HOLE ARRANGEMENT STYLE | ONE END DRILLED | | FIRST HOLE DIAMETER | 0.066 INCHES MINIMUM AND | | 0.070 INCHES MAXIMUM | | DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | 0.095 INCHES NOMINAL | | SPECIAL FEATURES | SHANK IS FLATTED TWO SIDES 0.190 IN. WIDTH ACROSS FLATS AND PARALLEL W/WRENCH FLATS ON HEAD | | THE MANUFACTURERS DATA | |
|
|