|
|
|
National Stock Number:
5315-01-176-5151
Federal Supply Class:
5315
National Item Identification Number:
011765151
Description:
PIN,STRAIGHT,HEADED
Detail:
A headed, cylindrically-shaped item having a solid shank for fitting into corresponding holes, used for aligning or fastening. It may have welding projections. It also may contain holes drilled perpendicular to axial centerline. Excludes PIN, ECCENTRIC.
|
Manufacturer Information:
| 3020M35P04 | 07482 | GENERAL ELECTRIC COMPANY |
|
Techincal Specification:
| UNDER HEAD LENGTH | 0.845 INCHES MINIMUM AND | | 0.865 INCHES MAXIMUM | | DIAMETER | 0.090 INCHES MINIMUM AND | | 0.094 INCHES MAXIMUM | | HEAD STYLE | FLAT FILLISTER | | STYLE DESIGNATOR | STRAIGHT | | MATERIAL | STEEL OVERALL | | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5630 ASSN STD SINGLE MATERIAL RESPONSE OVERALL | | HARDNESS RATING | 55.0 ROCKWELL C NOMINAL OVERALL | | CHAMFER LENGTH | 0.020 INCHES MINIMUM AND | | 0.030 INCHES MAXIMUM | | PIN CHAMFER ANGLE | 40.0 DEGREES MINIMUM AND | | 50.0 DEGREES MAXIMUM | | PIN HEAD DIAMETER | 0.170 INCHES MINIMUM AND | | 0.180 INCHES MAXIMUM | | HEIGHT | 0.095 INCHES MINIMUM AND | | 0.105 INCHES MAXIMUM | | HOLE ARRANGEMENT STYLE | BOTH END DRILLED | | FIRST HOLE DIAMETER | 0.035 INCHES MINIMUM AND | | 0.040 INCHES MAXIMUM | | SECOND HOLE DIAMETER | 0.035 INCHES MINIMUM AND | | 0.040 INCHES MAXIMUM | | DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | 0.073 INCHES MINIMUM AND | | 0.078 INCHES MAXIMUM | | CENTER TO CENTER DISTANCE BETWEEN HOLES | 0.830 INCHES NOMINAL | | SURFACE FINISH | 63.0 MICROINCHES ALL OTHER SURFACES | | 125.0 MICROINCHES OUTSIDE DIAMETER | | THE MANUFACTURERS DATA | | | MANUFACTURERS CODE | 07482 | | DESIGN CONTROL REFERENCE | 3020M35P04 |
|
|