|
|
|
National Stock Number:
5315-01-176-7459
Federal Supply Class:
5315
National Item Identification Number:
011767459
Description:
PIN,SHOULDER,HEADLESS
Detail:
A cylindrically-shaped headless item, having a shank at one or both ends. It is used for aligning, fastening, or transfer of torque and/or thrust by fitting into corresponding holes of another item. It may be threaded on one end.
|
Manufacturer Information:
| SM-B-561836 | D9182 | ZF INDUSTRIEANTRIEBE WITTEN GMBH | | SM-B-561836 ITEM 2 | 80063 | US ARMY COMMUNICATIONS & ELECTRONICS MATERIEL READINESS COMMAND LOGISTICS ENGINEERING DIR | | SM-B-561837-1 | 80063 | US ARMY COMMUNICATIONS & ELECTRONICS MATERIEL READINESS COMMAND LOGISTICS ENGINEERING DIR |
|
Techincal Specification:
| DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | 0.193 INCHES NOMINAL | | FIRST END STYLE | CHAMFERED | | FIRST END TAPER ANGLE | 30.0 DEGREES NOMINAL | | FIRST END TAPER LENGTH | 0.156 INCHES NOMINAL | | FIRST END LOCATION | CHAMFERED END | | FIRST HOLE DIAMETER | 0.125 INCHES MINIMUM AND 0.129 INCHES MAXIMUM | | HOLE ARRANGEMENT STYLE | ONE END DRILLED | | OVERALL LENGTH | 1.880 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-763,CONDITION A FED SPEC SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | STEEL COMP 304 OVERALL | | SECOND END RELATIONSHIP WITH FIRST END | NOT IDENTICAL | | SECOND END STYLE | SQUARE | | SHANK DIAMETER | 0.219 INCHES NOMINAL | | SHANK LENGTH | 1.255 INCHES NOMINAL | | SHOULDER DIAMETER | 0.311 INCHES MINIMUM AND 0.315 INCHES MAXIMUM | | SPECIAL FEATURES | FLAT ON CHAMFERED END 0.225 IN. MIN WIDE,0.235 IN. MAX WIDE,0.375 IN. LONG | | STYLE DESIGNATOR | SHOULDER | | SURFACE FINISH | 63.0 MICROINCHES OUTSIDE DIAMETER | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-35,TYPE 1 OR 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL | | SURFACE TREATMENT | PASSIVATE OVERALL |
|
|