| STYLE DESIGNATOR | STRAIGHT |
| MATERIAL | STEEL CORROSION RESISTING OVERALL |
| MATERIAL DOCUMENT AND CLASSIFICATION | AMS 6415 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| SURFACE TREATMENT | CHROMIUM OVERALL |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | AMS 2406 ASSN STD SINGLE TREATMENT RESPONSE OVERALL |
| HARDNESS RATING | 48.0 ROCKWELL C MINIMUM AND |
| 52.0 ROCKWELL C MAXIMUM OVERALL |
| CHAMFER LENGTH | 0.020 INCHES MINIMUM AND |
| 0.040 INCHES MAXIMUM |
| PIN CHAMFER ANGLE | 45.0 DEGREES NOMINAL |
| WIDTH ACROSS FLATS | 0.300 INCHES MINIMUM AND |
| 0.310 INCHES MAXIMUM |
| PIN HEAD DIAMETER | 0.380 INCHES MINIMUM AND |
| 0.400 INCHES MAXIMUM |
| HEIGHT | 0.050 INCHES MINIMUM AND |
| 0.060 INCHES MAXIMUM |
| SURFACE FINISH | 125.0 MICROINCHES ALL OTHER SURFACES |
| 63.0 MICROINCHES OUTSIDE DIAMETER |
| CRITICALITY CODE JUSTIFICATION | ABMZ |
| THE MANUFACTURERS DATA | |
| MANUFACTURERS CODE | 07482 |
| DESIGN CONTROL REFERENCE | 9115M54P01 |
| UNDER HEAD LENGTH | 0.490 INCHES MINIMUM AND |
| 0.500 INCHES MAXIMUM |
| DIAMETER | 0.2893 INCHES MINIMUM AND |
| 0.2898 INCHES MAXIMUM |
| HEAD STYLE | ROUND W/WRENCH FLATS |