|
|
|
National Stock Number:
5315-01-177-5964
Federal Supply Class:
5315
National Item Identification Number:
011775964
Description:
PIN,STRAIGHT,HEADED
Detail:
A headed, cylindrically-shaped item having a solid shank for fitting into corresponding holes, used for aligning or fastening. It may have welding projections. It also may contain holes drilled perpendicular to axial centerline. Excludes PIN, ECCENTRIC.
|
Manufacturer Information:
| 9510M49P01 | 07482 | GENERAL ELECTRIC COMPANY |
|
Techincal Specification:
| CHAMFER LENGTH | 0.020 INCHES MINIMUM AND | | 0.030 INCHES MAXIMUM | | PIN CHAMFER ANGLE | 45.0 DEGREES NOMINAL | | WIDTH ACROSS FLATS | 0.175 INCHES MINIMUM AND | | 0.185 INCHES MAXIMUM | | PIN HEAD DIAMETER | 0.300 INCHES MINIMUM AND | | 0.320 INCHES MAXIMUM | | HEIGHT | 0.055 INCHES MINIMUM AND | | 0.065 INCHES MAXIMUM | | HOLE ARRANGEMENT STYLE | ONE END DRILLED | | FIRST HOLE DIAMETER | 0.066 INCHES MINIMUM AND | | 0.070 INCHES MAXIMUM | | DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | 0.096 INCHES NOMINAL | | SURFACE FINISH | 125.0 MICROINCHES OVERALL | | THE MANUFACTURERS DATA | | | MANUFACTURERS CODE | 07482 | | DESIGN CONTROL REFERENCE | 9510M49P01 | | UNDER HEAD LENGTH | 0.540 INCHES MINIMUM AND | | 0.560 INCHES MAXIMUM | | DIAMETER | 0.148 INCHES MINIMUM AND | | 0.152 INCHES MAXIMUM | | HEAD STYLE | ROUND W/WRENCH FLATS | | STYLE DESIGNATOR | STRAIGHT | | MATERIAL | STEEL CORROSION RESISTING OVERALL | | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5759,L605 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
|
|