|
|
|
National Stock Number:
5315-01-178-2166
Federal Supply Class:
5315
National Item Identification Number:
011782166
Description:
PIN,STRAIGHT,HEADED
Detail:
A headed, cylindrically-shaped item having a solid shank for fitting into corresponding holes, used for aligning or fastening. It may have welding projections. It also may contain holes drilled perpendicular to axial centerline. Excludes PIN, ECCENTRIC.
|
Manufacturer Information:
| 69291C6P4-24 | 73030 | HAMILTON SUNDSTRAND CORPORATION | | MS9843-12 | 78753 | TE-CO | | MS9843-12 | 96906 | MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M |
|
Techincal Specification:
| UNDER HEAD LENGTH | 0.823 INCHES MINIMUM AND | | 0.833 INCHES MAXIMUM | | DIAMETER | 0.1244 INCHES MINIMUM AND | | 0.1249 INCHES MAXIMUM | | HEAD STYLE | PAN NO. 2 (R1 NOT REQUIRED IN ITEM DESCRIPTION) | | STYLE DESIGNATOR | STRAIGHT | | MATERIAL | STEEL COMP 615 OVERALL | | MATERIAL DOCUMENT AND CLASSIFICATION | AMS5616 ASSN STD SINGLE MATERIAL RESPONSE OVERALL | | HARDNESS RATING | 45.0 ROCKWELL C MINIMUM AND | | 50.0 ROCKWELL C MAXIMUM OVERALL | | CHAMFER LENGTH | 0.020 INCHES MINIMUM AND | | 0.040 INCHES MAXIMUM | | PIN CHAMFER ANGLE | 15.0 DEGREES MINIMUM AND | | 25.0 DEGREES MAXIMUM | | PIN HEAD DIAMETER | 0.245 INCHES MINIMUM AND | | 0.255 INCHES MAXIMUM | | HEIGHT | 0.025 INCHES MINIMUM AND | | 0.045 INCHES MAXIMUM | | HOLE ARRANGEMENT STYLE | ONE END DRILLED | | FIRST HOLE DIAMETER | 0.065 INCHES MINIMUM AND | | 0.070 INCHES MAXIMUM | | DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | 0.060 INCHES MINIMUM AND | | 0.090 INCHES MAXIMUM | | SURFACE FINISH | 32.0 MICROINCHES OUTSIDE DIAMETER |
|
|