| DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | 0.195 INCHES NOMINAL |
| DIAMETER | 0.4353 INCHES MINIMUM AND 0.4363 INCHES MAXIMUM |
| FIRST END STYLE | CHAMFERED |
| FIRST END TAPER ANGLE | 45.0 DEGREES NOMINAL |
| FIRST END TAPER LENGTH | 0.030 INCHES MINIMUM AND 0.060 INCHES MAXIMUM |
| FIRST HOLE DIAMETER | 0.106 INCHES MINIMUM AND 0.114 INCHES MAXIMUM |
| HARDNESS RATING | 27.0 ROCKWELL C NOMINAL OVERALL |
| HEAD STYLE | FLAT |
| HEIGHT | 0.125 INCHES NOMINAL |
| HOLE ARRANGEMENT STYLE | ONE END DRILLED |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-N-286 CL A,COLD DRAWN FED SPEC SINGLE MATERIAL RESPONSE OVERALL |
| MATERIAL | NICKEL ALLOY OVERALL |
| PIN HEAD DIAMETER | 0.660 INCHES NOMINAL |
| UNDER HEAD LENGTH | 1.625 INCHES NOMINAL |
| UNDERCUT DIAMETER | 0.410 INCHES NOMINAL |
| UNDERCUT WIDTH | 0.070 INCHES MINIMUM AND 0.130 INCHES MAXIMUM |
| STYLE DESIGNATOR | GROOVE |
| SURFACE FINISH | 63.0 MICROINCHES OUTSIDE DIAMETER |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-L-8937 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL |
| SURFACE TREATMENT | LUBRICANT OVERALL |