|
|
|
National Stock Number:
5315-01-184-2110
Federal Supply Class:
5315
National Item Identification Number:
011842110
Description:
PIN,GROOVED,HEADLESS
Detail:
A headless item of various shapes, usually cylindrical, having either circular or longitudinal groove(s). Its length must not exceed 12 inches (304 MM). Excludes ROD, GROOVED, HEADLESS; SHAFT (as modified); and PIN, VEHICULAR LEAF SPRING SHACKLE.
|
Manufacturer Information:
| 5035597-101 | 57958 | SIGNALS WARFARE PROJECT MANAGER | | 5035597-101 | 80063 | US ARMY COMMUNICATIONS & ELECTRONICS MATERIEL READINESS COMMAND LOGISTICS ENGINEERING DIR |
|
Techincal Specification:
| EFFECTIVE LENGTH | 7.035 INCHES NOMINAL | | DIAMETER | 1.3714 INCHES MINIMUM AND 1.3730 INCHES MAXIMUM | | DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | 0.375 INCHES NOMINAL | | FIRST END STYLE | CHAMFERED | | FIRST END TAPER ANGLE | 30.0 DEGREES NOMINAL | | FIRST END LOCATION | CHAMFERED END | | FIRST HOLE DIAMETER | 0.328 INCHES NOMINAL | | FIRST END TAPER LENGTH | 0.090 INCHES NOMINAL | | HARDNESS RATING | | | HOLE ARRANGEMENT STYLE | ONE END DRILLED | | OVERALL LENGTH | 7.500 INCHES NOMINAL | | SECOND END RELATIONSHIP WITH FIRST END | NOT IDENTICAL | | SECOND END STYLE | SQUARE | | SPECIAL FEATURES | CONSISTS OF STOP,PRESS ON PIN | | STYLE DESIGNATOR | GROOVE | | SURFACE FINISH | 32.0 MICROINCHES OUTSIDE DIAMETER | | UNDERCUT DIAMETER | 1.287 INCHES MINIMUM AND 1.295 INCHES MAXIMUM | | UNDERCUT WIDTH | 0.056 INCHES MINIMUM AND 0.060 INCHES MAXIMUM |
|
|