|
|
|
National Stock Number:
5315-01-186-5631
Federal Supply Class:
5315
National Item Identification Number:
011865631
Description:
PIN,STRAIGHT,HEADLESS
Detail:
A headless, cylindrically-shaped item having a straight, smooth, solid body, with or without a drilled hole(s). It has an outside diameter equal to or less than its length. Its length must not exceed twelve inches (304 MM); for items whose length exceeds twelve inches (304 MM); see ROD, STRAIGHT, HEADLESS. It is used for aligning or transfer of torque and/or thrust, by fitting into corresponding holes of another item. See also PIN, STRAIGHT, THREADED.
|
Manufacturer Information:
| 219T650 | 27315 | MORRIS MATERIAL HANDLING, INC. |
|
Techincal Specification:
| DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | 0.500 INCHES NOMINAL | | FIRST HOLE DIAMETER | 0.521 INCHES MINIMUM AND 0.551 INCHES MAXIMUM | | FIRST END STYLE | CHAMFERED | | FIRST END TAPER ANGLE | 30.0 DEGREES NOMINAL | | FIRST END TAPER LENGTH | 0.125 INCHES NOMINAL | | HOLE ARRANGEMENT STYLE | ONE END DRILLED | | PIN OVERALL LENGTH | 5.125 INCHES NOMINAL | | PIN OVERALL DIAMETER | 1.9981 INCHES MINIMUM AND 1.9988 INCHES MAXIMUM | | MATERIAL | STEEL OVERALL | | SECOND END COUNTERBORE DEPTH | 0.500 INCHES NOMINAL | | SECOND END COUNTERBORE DIAMETER | 0.875 INCHES NOMINAL | | SECOND END STYLE | THREADED AND COUNTERBORED | | SECOND END TAPER ANGLE | 30.0 DEGREES NOMINAL | | SECOND END TAPER LENGTH | 0.125 INCHES NOMINAL | | SECOND END RELATIONSHIP WITH FIRST END | NOT IDENTICAL | | SPECIAL FEATURES | 0.245 IN. MIN 0.265 IN. MAX DIA HOLE |
|
|