|
|
|
National Stock Number:
5315-01-190-4814
Federal Supply Class:
5315
National Item Identification Number:
011904814
Description:
PIN,SHOULDER,HEADLESS
Detail:
A cylindrically-shaped headless item, having a shank at one or both ends. It is used for aligning, fastening, or transfer of torque and/or thrust by fitting into corresponding holes of another item. It may be threaded on one end.
|
Manufacturer Information:
| 3M944L1 | 17446 | HUCK INTERNATIONAL, INC | | 3M944L1 | 56822 | BAYER INC | | 3M944L1 | 56878 | SPS TECHNOLOGIES, LLC | | 3M944L1 | 76301 | THE BOEING COMPANY | | 3M944L1 | 80539 | SPS TECHNOLOGIES, LLC | | 3M944L1 | 92215 | HOWMET GLOBAL FASTENING SYSTEMS INC | | 3M944L1 | 97928 | HUCK INTL INC |
|
Techincal Specification:
| MATERIAL | TITANIUM ALLOY UNS R56400 OVERALL | | MATERIAL DOCUMENT AND CLASSIFICATION | AMS4967 ASSN STD SINGLE MATERIAL RESPONSE OVERALL | | STYLE DESIGNATOR | SHOULDER | | SHANK LENGTH | 0.301 INCHES NOMINAL | | SHOULDER WIDTH ACROSS FLATS | 0.500 INCHES NOMINAL | | SHANK DIAMETER | 0.2486 INCHES MINIMUM AND | | 0.2495 INCHES MAXIMUM | | OVERALL LENGTH | 1.024 INCHES NOMINAL | | SECOND SHANK DIAMETER | 0.2490 INCHES MINIMUM AND | | 0.2495 INCHES MAXIMUM | | SECOND SHANK LENGTH | 0.623 INCHES NOMINAL | | FIRST END STYLE | SQUARE | | SECOND END RELATIONSHIP WITH FIRST END | NOT IDENTICAL | | SECOND END STYLE | CHAMFERED | | SECOND END TAPER LENGTH | 0.050 INCHES NOMINAL | | SECOND END TAPER ANGLE | 45.0 DEGREES NOMINAL | | FIRST END LOCATION | UNTHREADED END | | THREAD SERIES DESIGNATOR | UNJF | | NOMINAL THREAD SIZE | 0.250 INCHES | | THREAD CLASS | 3A | | THREAD DIRECTION | RIGHT-HAND | | THREAD LENGTH | 0.330 INCHES NOMINAL | | HOLE ARRANGEMENT STYLE | ONE END DRILLED | | FIRST HOLE DIAMETER | 0.070 INCHES MINIMUM AND | | 0.080 INCHES MAXIMUM | | DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | 0.130 INCHES NOMINAL | | SURFACE FINISH | 32.0 MICROINCHES UNTHREADED END |
|
|