|
|
|
National Stock Number:
5315-01-194-3108
Federal Supply Class:
5315
National Item Identification Number:
011943108
Description:
PIN,STRAIGHT,HEADED
Detail:
A headed, cylindrically-shaped item having a solid shank for fitting into corresponding holes, used for aligning or fastening. It may have welding projections. It also may contain holes drilled perpendicular to axial centerline. Excludes PIN, ECCENTRIC.
|
Manufacturer Information:
| 76Z5808-1 | 0DHG4 | GULF COAST HOLDINGS INC DBA UNIDYNAMICS | | 76Z5808-1 | 95310 | UNIDYNAMICS/SAINT LOUIS INC CONROE OPNS | | JCM-10485-001 | 58905 | STRIKE WEAPONS AND UNMANNED AVIATION | | 76Z5808-1 | 98523 | JERED LLC |
|
Techincal Specification:
| UNDER HEAD LENGTH | 1.940 INCHES NOMINAL | | DIAMETER | 0.368 INCHES MINIMUM AND | | 0.371 INCHES MAXIMUM | | HEAD STYLE | ROUND W/WRENCH FLATS | | STYLE DESIGNATOR | STRAIGHT | | MATERIAL | STEEL COMP 630 OVERALL | | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5643 ASSN STD SINGLE MATERIAL RESPONSE OVERALL | | SURFACE TREATMENT | PASSIVATE OVERALL | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-35,TY 1 FED SPEC SINGLE TREATMENT RESPONSE OVERALL | | CHAMFER LENGTH | 0.060 INCHES NOMINAL | | PIN CHAMFER ANGLE | 45.0 DEGREES NOMINAL | | WIDTH ACROSS FLATS | 0.740 INCHES MINIMUM AND | | 0.752 INCHES MAXIMUM | | PIN HEAD DIAMETER | 0.875 INCHES NOMINAL | | HEIGHT | 0.250 INCHES NOMINAL | | HOLE ARRANGEMENT STYLE | ONE END DRILLED | | FIRST HOLE DIAMETER | 0.106 INCHES MINIMUM AND | | 0.116 INCHES MAXIMUM | | DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | 0.170 INCHES NOMINAL | | SURFACE FINISH | 63.0 MICROINCHES OUTSIDE DIAMETER | | SPECIAL FEATURES | HOLE THROUGH PIN 1.120 IN. FROM END; HEAD DRILLED 1.270 IN. DP W/0.094 IN. DIA DRILL; 0.250-28 2B THD 0.200 IN. MIN DP IN HEAD |
|
|