|
|
|
National Stock Number:
5315-01-194-3110
Federal Supply Class:
5315
National Item Identification Number:
011943110
Description:
PIN,STRAIGHT,HEADED
Detail:
A headed, cylindrically-shaped item having a solid shank for fitting into corresponding holes, used for aligning or fastening. It may have welding projections. It also may contain holes drilled perpendicular to axial centerline. Excludes PIN, ECCENTRIC.
|
Manufacturer Information:
| 76Z5808-3 | 0DHG4 | GULF COAST HOLDINGS INC DBA UNIDYNAMICS | | 76Z5808-3 | 95310 | UNIDYNAMICS/SAINT LOUIS INC CONROE OPNS | | JCM-10485-005 | 58905 | STRIKE WEAPONS AND UNMANNED AVIATION | | 76Z5808-3 | 98523 | JERED LLC |
|
Techincal Specification:
| UNDER HEAD LENGTH | 3.576 INCHES NOMINAL | | DIAMETER | 0.493 INCHES MINIMUM AND | | 0.496 INCHES MAXIMUM | | HEAD STYLE | ROUND W/WRENCH FLATS | | STYLE DESIGNATOR | STRAIGHT | | MATERIAL | STEEL COMP 630 OVERALL | | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5643 ASSN STD SINGLE MATERIAL RESPONSE OVERALL | | SURFACE TREATMENT | PASSIVATE OVERALL | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-35,TY 1 FED SPEC SINGLE TREATMENT RESPONSE OVERALL | | CHAMFER LENGTH | 0.060 INCHES NOMINAL | | PIN CHAMFER ANGLE | 45.0 DEGREES NOMINAL | | WIDTH ACROSS FLATS | 0.865 INCHES MINIMUM AND | | 0.877 INCHES MAXIMUM | | PIN HEAD DIAMETER | 0.990 INCHES MINIMUM AND | | 1.002 INCHES MAXIMUM | | HEIGHT | 0.250 INCHES NOMINAL | | HOLE ARRANGEMENT STYLE | ONE END DRILLED | | FIRST HOLE DIAMETER | 0.106 INCHES MINIMUM AND | | 0.116 INCHES MAXIMUM | | DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | 0.170 INCHES NOMINAL | | SURFACE FINISH | 63.0 MICROINCHES OUTSIDE DIAMETER | | SPECIAL FEATURES | HOLE DRILLED THROUGH PIN 1.956 IN. FROM END,0.182 IN. DIA; HOLE 2.070 IN. DP DRILLED IN CENTER OF HEAD,0.094 IN. DIA; CENTER HOLE THREADED 0.200 IN. MIN DP W/0.250-28 2B |
|
|