|
|
|
National Stock Number:
5315-01-195-8025
Federal Supply Class:
5315
National Item Identification Number:
011958025
Description:
PIN,STRAIGHT,HEADED
Detail:
A headed, cylindrically-shaped item having a solid shank for fitting into corresponding holes, used for aligning or fastening. It may have welding projections. It also may contain holes drilled perpendicular to axial centerline. Excludes PIN, ECCENTRIC.
|
Manufacturer Information:
| 11602350-1 | 19207 | U S ARMY TANK AUTOMOTIVE COMMAND AMSTA-IM-MM |
|
Techincal Specification:
| UNDER HEAD LENGTH | 2.280 INCHES MINIMUM AND | | 2.344 INCHES MAXIMUM | | DIAMETER | 0.742 INCHES MINIMUM AND | | 0.750 INCHES MAXIMUM | | HEAD STYLE | FLAT CHAMFER | | STYLE DESIGNATOR | STRAIGHT | | MATERIAL | STEEL COMP 1009 OR | | STEEL COMP 1010 OR | | STEEL COMP 1011 OR | | STEEL COMP 1012 OR | | STEEL COMP 1013 OR | | STEEL COMP 1015 OR | | STEEL COMP 1016 OR | | STEEL COMP 1017 OR | | STEEL COMP 1018 OR | | STEEL COMP 1019 OR | | STEEL COMP 1020 OVERALL | | SURFACE TREATMENT | PHOSPHATE MANGANESE OR | | CADMIUM AND | | CHROMATE OVERALL | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | D0D-P-16232 MIL SPEC 1ST TREATMENT RESPONSE OR | | QQ-P-416,TY 2,CL 2 FED SPEC 2ND TREATMENT RESPONSE OVERALL | | HARDNESS RATING | 89.0 ROCKWELL SUPERFICIAL 15-N MINIMUM AND | | 91.0 ROCKWELL SUPERFICIAL 15-N MAXIMUM OVERALL | | CHAMFER LENGTH | 0.090 INCHES MINIMUM AND | | 0.150 INCHES MAXIMUM | | PIN CHAMFER ANGLE | 30.0 DEGREES NOMINAL | | PIN HEAD DIAMETER | 0.937 INCHES NOMINAL | | HEIGHT | 0.250 INCHES NOMINAL | | HOLE ARRANGEMENT STYLE | ONE END DRILLED | | FIRST HOLE DIAMETER | 0.188 INCHES NOMINAL | | DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | 0.218 INCHES NOMINAL | | SURFACE FINISH | 16.0 MICROINCHES OUTSIDE DIAMETER | | FEATURES PROVIDED | CASEHARDENED |
|
|