|
|
|
National Stock Number:
5315-01-196-7923
Federal Supply Class:
5315
National Item Identification Number:
011967923
Description:
PIN,STRAIGHT,HEADLESS
Detail:
A headless, cylindrically-shaped item having a straight, smooth, solid body, with or without a drilled hole(s). It has an outside diameter equal to or less than its length. Its length must not exceed twelve inches (304 MM); for items whose length exceeds twelve inches (304 MM); see ROD, STRAIGHT, HEADLESS. It is used for aligning or transfer of torque and/or thrust, by fitting into corresponding holes of another item. See also PIN, STRAIGHT, THREADED.
|
Manufacturer Information:
| 76Z5775-2 | 0DHG4 | GULF COAST HOLDINGS INC DBA UNIDYNAMICS | | 76Z5775-2 | 95310 | UNIDYNAMICS/SAINT LOUIS INC CONROE OPNS | | JCM-10452-009 | 58905 | STRIKE WEAPONS AND UNMANNED AVIATION | | 76Z5775-2 | 98523 | JERED LLC |
|
Techincal Specification:
| MATERIAL | STEEL COMP 630 OVERALL | | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5643 ASSN STD SINGLE MATERIAL RESPONSE OVERALL | | SURFACE TREATMENT | PASSIVATE OVERALL | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-35,TY 1 FED SPEC SINGLE TREATMENT RESPONSE OVERALL | | FIRST END STYLE | CHAMFERED | | FIRST END TAPER LENGTH | 0.280 INCHES MINIMUM AND | | 0.310 INCHES MAXIMUM | | FIRST END TAPER ANGLE | 45.0 DEGREES NOMINAL | | SECOND END RELATIONSHIP WITH FIRST END | NOT IDENTICAL | | SECOND END STYLE | CHAMFERED | | SECOND END TAPER LENGTH | 0.500 INCHES MINIMUM AND | | 0.530 INCHES MAXIMUM | | SECOND END TAPER ANGLE | 10.0 DEGREES MINIMUM AND | | 20.0 DEGREES MAXIMUM | | HOLE ARRANGEMENT STYLE | ONE END DRILLED | | FIRST HOLE DIAMETER | 0.6250 INCHES MINIMUM AND | | 0.6255 INCHES MAXIMUM | | DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | 0.600 INCHES MINIMUM AND | | 0.630 INCHES MAXIMUM | | PIN OVERALL LENGTH | 10.015 INCHES NOMINAL | | PIN OVERALL DIAMETER | 0.9960 INCHES MINIMUM AND | | 0.9970 INCHES MAXIMUM | | SPECIAL FEATURES | 1ST END HAS FLATS TO 0.375 IN. THK,1.015 IN. LG |
|
|