|
|
|
National Stock Number:
5315-01-197-8213
Federal Supply Class:
5315
National Item Identification Number:
011978213
Description:
PIN,SHOULDER,HEADLESS
Detail:
A cylindrically-shaped headless item, having a shank at one or both ends. It is used for aligning, fastening, or transfer of torque and/or thrust by fitting into corresponding holes of another item. It may be threaded on one end.
|
Manufacturer Information:
| 10123210 | A486G | NIMIKKEISTOKESKUS NCB FINLAND | | 123486-4 | 80359 | HERR AND CO INC | | 3M1093-4 | 5H860 | THOMAS INSTRUMENT, INCORPORATED | | 3M1093-4 | 76301 | THE BOEING COMPANY | | 74A501252-2007 | 76301 | THE BOEING COMPANY | | 123486-4 | 80539 | SPS TECHNOLOGIES, LLC | | VCW0054-4 | 06710 | VALLEY-TODECO, INC. | | PBF1406-4 | 27624 | SPS TECHNOLOGIES LLC |
|
Techincal Specification:
| FIRST END STYLE | CHAMFERED | | FIRST END LOCATION | THREADED END | | FIRST END TAPER ANGLE | 44.5 DEGREES MINIMUM AND 45.5 DEGREES MAXIMUM | | FIRST END TAPER LENGTH | 0.060 INCHES MINIMUM AND 0.070 INCHES MAXIMUM | | FIRST STEP DIAMETER | 0.8273 INCHES MINIMUM AND 0.8278 INCHES MAXIMUM | | FIRST STEP LENGTH | 1.330 INCHES NOMINAL | | INTERNAL DRIVE STYLE | SOCKET | | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5629 ASSN STD SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | STEEL COMP XM-13 OVERALL | | NOMINAL THREAD SIZE | 0.500 INCHES | | SECOND END COUNTERBORE DEPTH | 0.098 INCHES NOMINAL | | SECOND END STYLE | COUNTERBORED W/O THRU HOLE | | SECOND END RELATIONSHIP WITH FIRST END | NOT IDENTICAL | | SECOND STEP DIAMETER | 0.5990 INCHES MINIMUM AND 0.5994 INCHES MAXIMUM | | SECOND STEP LENGTH | 1.000 INCHES NOMINAL | | SPECIAL FEATURES | DRY FILM LUBRICANT | | STYLE DESIGNATOR | SHOULDER | | SURFACE FINISH | 32.0 MICROINCHES OVERALL | | THIRD STEP DIAMETER | 0.500 INCHES NOMINAL | | THIRD STEP LENGTH | 0.900 INCHES NOMINAL | | THREAD CLASS | 3A | | THREAD DIRECTION | RIGHT-HAND | | THREAD LENGTH | 0.835 INCHES NOMINAL | | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL JOINT FINE (UNJF) | | THREAD QUANTITY PER INCH | 20 | | WIDTH BETWEEN FLATS | 0.375 INCHES MINIMUM AND 0.379 INCHES MAXIMUM |
|
|