|
|
|
National Stock Number:
5315-01-198-4767
Federal Supply Class:
5315
National Item Identification Number:
011984767
Description:
PIN,SHOULDER,HEADLESS
Detail:
A cylindrically-shaped headless item, having a shank at one or both ends. It is used for aligning, fastening, or transfer of torque and/or thrust by fitting into corresponding holes of another item. It may be threaded on one end.
|
Manufacturer Information:
| 810AS1519 | 1CA31 | EDS ORDNANCE INC | | 810AS1519 | 30003 | NAVAL AIR SYSTEMS COMMAND MANAGED ORIGINAL DESIGN ACTIVITY NOT MATERIAL/PARTS SUPPLIER | | 810AS1519 | 3B150 | RAYTHEON COMPANY | | 810AS1519 | 49956 | RAYTHEON COMPANY | | 810AS1519 | 4X026 | LENTOOL AND MACHINE CO INC | | 810AS1519 | 54X10 | RAYTHEON COMPANY | | 810AS1519 | 98752 | WARNER ROBINS AIR LOGISTICS CENTER |
|
Techincal Specification:
| FIRST END STYLE | CHAMFERED | | FIRST END TAPER ANGLE | 40.0 DEGREES MINIMUM AND 50.0 DEGREES MAXIMUM | | FIRST END TAPER LENGTH | 0.030 INCHES NOMINAL | | FIRST END LOCATION | CHAMFERED END | | OVERALL LENGTH | 3.406 INCHES NOMINAL | | MATERIAL | STEEL OVERALL | | SECOND END RELATIONSHIP WITH FIRST END | NOT IDENTICAL | | SECOND END STYLE | POINTED | | SECOND END TAPER ANGLE | 90.0 DEGREES NOMINAL | | SECOND END TAPER LENGTH | 0.030 INCHES NOMINAL | | SECOND SHANK DIAMETER | 0.249 INCHES MINIMUM AND 0.250 INCHES MAXIMUM | | SECOND SHANK LENGTH | 0.750 INCHES NOMINAL | | SHANK DIAMETER | 0.250 INCHES NOMINAL | | SHANK LENGTH | 0.191 INCHES NOMINAL | | SHOULDER DIAMETER | 0.370 INCHES MINIMUM AND 0.380 INCHES MAXIMUM | | STYLE DESIGNATOR | UNDERCUT | | UNDERCUT DIAMETER | 0.174 INCHES MINIMUM AND 0.184 INCHES MAXIMUM | | UNDERCUT WIDTH | 0.062 INCHES NOMINAL |
|
|