|
|
|
National Stock Number:
5315-01-210-2034
Federal Supply Class:
5315
National Item Identification Number:
012102034
Description:
PIN,STRAIGHT,HEADED
Detail:
A headed, cylindrically-shaped item having a solid shank for fitting into corresponding holes, used for aligning or fastening. It may have welding projections. It also may contain holes drilled perpendicular to axial centerline. Excludes PIN, ECCENTRIC.
|
Manufacturer Information:
| F251 | 00365 | TLD ACE CORP | | MS35810-14 | 96906 | MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M |
|
Techincal Specification:
| UNDER HEAD LENGTH | 0.938 INCHES MINIMUM AND | | 1.062 INCHES MAXIMUM | | DIAMETER | 0.368 INCHES MINIMUM AND | | 0.373 INCHES MAXIMUM | | HEAD STYLE | FLAT CHAMFER | | STYLE DESIGNATOR | STRAIGHT | | MATERIAL | STEEL COMP 1010 OVERALL | | MATERIAL DOCUMENT AND CLASSIFICATION | FED-STD 66 FED STD SINGLE MATERIAL RESPONSE OVERALL | | SURFACE TREATMENT | CADMIUM OVERALL | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TYPE 2,CLASS 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL | | HARDNESS RATING | 70.0 ROCKWELL SUPERFICIAL 30-N MINIMUM OVERALL | | SHEAR STRENGTH | 41000 DOUBLE POUNDS PER SQUARE INCH | | CHAMFER LENGTH | 0.078 INCHES NOMINAL | | PIN CHAMFER ANGLE | 40.0 DEGREES MINIMUM AND | | 45.0 DEGREES MAXIMUM | | PIN HEAD DIAMETER | 0.490 INCHES MINIMUM AND | | 0.510 INCHES MAXIMUM | | HEIGHT | 0.115 INCHES MINIMUM AND | | 0.135 INCHES MAXIMUM | | HOLE ARRANGEMENT STYLE | ONE END DRILLED | | FIRST HOLE DIAMETER | 0.104 INCHES MINIMUM AND | | 0.119 INCHES MAXIMUM | | DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | 0.124 INCHES NOMINAL | | SPEC/STD CONTROLLING DATA | | | MANUFACTURERS CODE | 96906 | | DEFINITIVE GOVERNMENT SPEC/STD REFERENCE | MS35810-14 |
|
|