|
|
|
National Stock Number:
5315-01-216-7958
Federal Supply Class:
5315
National Item Identification Number:
012167958
Description:
PIN,GROOVED,HEADLESS
Detail:
A headless item of various shapes, usually cylindrical, having either circular or longitudinal groove(s). Its length must not exceed 12 inches (304 MM). Excludes ROD, GROOVED, HEADLESS; SHAFT (as modified); and PIN, VEHICULAR LEAF SPRING SHACKLE.
|
Manufacturer Information:
| 12343339-4 | 19207 | U S ARMY TANK AUTOMOTIVE COMMAND AMSTA-IM-MM |
|
Techincal Specification:
| MATERIAL | STEEL COMP 4140 OR | | STEEL COMP 4340 OR | | STEEL COMP 8640 OR | | STEEL COMP 8740 OVERALL | | SURFACE TREATMENT | CADMIUM AND | | CHROMATE OR | | ZINC AND | | CHROMATE OVERALL | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416 TY2 CL3 FED SPEC 1ST TREATMENT RESPONSE OR | | QQ-Z-325 TY2 CL3 FED SPEC 2ND TREATMENT RESPONSE OVERALL | | HARDNESS RATING | 32.0 ROCKWELL C MINIMUM AND | | 38.0 ROCKWELL C MAXIMUM OVERALL | | STYLE DESIGNATOR | CIRCULAR GROOVE | | OVERALL LENGTH | 10.100 INCHES NOMINAL | | DIAMETER | 0.992 INCHES MINIMUM AND | | 0.995 INCHES MAXIMUM | | FIRST END STYLE | CHAMFERED | | FIRST END TAPER LENGTH | 0.120 INCHES NOMINAL | | FIRST END TAPER ANGLE | 30.0 DEGREES NOMINAL | | SECOND END RELATIONSHIP WITH FIRST END | NOT IDENTICAL | | SECOND END STYLE | CHAMFERED AND COUNTERBORED | | SECOND END TAPER LENGTH | 0.120 INCHES NOMINAL | | SECOND END COUNTERBORE DIAMETER | 0.343 INCHES NOMINAL | | SECOND END TAPER ANGLE | 30.0 DEGREES NOMINAL | | FIRST END LOCATION | UNTHREADED END | | HOLE ARRANGEMENT STYLE | BOTH END DRILLED | | FIRST HOLE DIAMETER | 0.190 INCHES NOMINAL | | SECOND HOLE DIAMETER | 0.190 INCHES NOMINAL | | DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | 1.926 INCHES MINIMUM AND | | 1.929 INCHES MAXIMUM | | CENTER TO CENTER DISTANCE BETWEEN HOLES | 8.176 INCHES MINIMUM AND | | 8.179 INCHES MAXIMUM | | SURFACE FINISH | 63.0 MICROINCHES OUTSIDE DIAMETER | | SPECIAL FEATURES | HOLES GROOVES STYLE |
|
|