| DIAMETER | 7.978 MILLIMETERS MINIMUM AND 8.000 MILLIMETERS MAXIMUM |
| DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | 4.0 MILLIMETERS NOMINAL |
| DISTANCE FROM CENTERLINE TO FLAT | 4.85 MILLIMETERS MINIMUM AND 5.15 MILLIMETERS MAXIMUM |
| CHAMFER LENGTH | 1.0 MILLIMETERS NOMINAL |
| FIRST HOLE DIAMETER | 1.950 MILLIMETERS MINIMUM AND 2.127 MILLIMETERS MAXIMUM |
| HARDNESS RATING | 20.0 ROCKWELL C MINIMUM OVERALL AND 25.0 ROCKWELL C MAXIMUM OVERALL |
| HEAD STYLE | DEE CHAMFER |
| HEIGHT | 1.85 MILLIMETERS MINIMUM AND 2.15 MILLIMETERS MAXIMUM |
| HOLE ARRANGEMENT STYLE | ONE END DRILLED |
| MATERIAL DOCUMENT AND CLASSIFICATION | AISI ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| MATERIAL | STEEL COMP 1040 OVERALL OR STEEL COMP 1041 OVERALL OR STEEL COMP 1042 OVERALL OR STEEL COMP 1043 OVERALL OR STEEL COMP 1044 OVERALL OR STEEL COMP 1045 OVERALL |
| PIN HEAD DIAMETER | 14.0 MILLIMETERS NOMINAL |
| PIN CHAMFER ANGLE | 45.0 DEGREES NOMINAL |
| PROPRIETARY CHARACTERISTICS | PACS |
| STYLE DESIGNATOR | STRAIGHT |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TY 2,CL 2 FED SPEC 1ST TREATMENT RESPONSE OVERALL OR MIL-C-87115,CL 1 MIL SPEC 2ND TREATMENT RESPONSE OVERALL OR MIL-C-83488,CL 2,TY 2 MIL SPEC 3RD TREATMENT RESPONSE OVERALL |
| SURFACE TREATMENT | CADMIUM OVERALL AND CHROMATE OVERALL OR CHROMATE OVERALL AND ZINC OVERALL OR ALUMINUM OVERALL AND CHROMATE OVERALL |
| UNDER HEAD LENGTH | 28.0 MILLIMETERS NOMINAL |