| DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | 2.5 MILLIMETERS NOMINAL |
| FIRST HOLE DIAMETER | 1.950 MILLIMETERS MINIMUM AND 2.127 MILLIMETERS MAXIMUM |
| FIRST STEP DIAMETER | 27.0 MILLIMETERS NOMINAL |
| FIRST STEP LENGTH | 2.0 MILLIMETERS NOMINAL |
| HARDNESS RATING | 28.0 ROCKWELL C MINIMUM OVERALL AND 32.0 ROCKWELL C MAXIMUM OVERALL |
| HEAD STYLE | FLAT |
| HEIGHT | 2.0 MILLIMETERS NOMINAL |
| HOLE ARRANGEMENT STYLE | ONE END DRILLED |
| MATERIAL DOCUMENT AND CLASSIFICATION | AISI ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| MATERIAL | STEEL COMP 4340 OVERALL |
| PIN HEAD DIAMETER | 27.0 MILLIMETERS NOMINAL |
| PROPRIETARY CHARACTERISTICS | PACS |
| NUMERIC DESIGNATION OF STEP ECCENTRIC TO HEAD | 2 |
| OFFSET DISTANCE BETWEEN GEOMETRIC CENTER OF HEAD AND CENTERLINE OF SHANK/SHOULDER | 6.5 MILLIMETERS NOMINAL |
| OVERALL LENGTH | 41.0 MILLIMETERS NOMINAL |
| SPECIAL FEATURES | 6.450 MM MIN 6.703 MM DIA HOLE IN HEAD |
| SECOND STEP DIAMETER | 9.991 MILLIMETERS MINIMUM AND 10.000 MILLIMETERS MAXIMUM |
| SECOND STEP LENGTH | 34.0 MILLIMETERS NOMINAL |
| STYLE DESIGNATOR | ECCENTRIC |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TY 2,CL 2 FED SPEC 1ST TREATMENT RESPONSE OVERALL OR MIL-C-87115,CL 1 MIL SPEC 2ND TREATMENT RESPONSE OVERALL OR MIL-C-83488,CL 2,TY 2 MIL SPEC 3RD TREATMENT RESPONSE OVERALL |
| SURFACE TREATMENT | CADMIUM OVERALL AND CHROMATE OVERALL OR CHROMATE OVERALL AND ZINC OVERALL OR ALUMINUM OVERALL AND CHROMATE OVERALL |