|
|
|
National Stock Number:
5315-01-226-8515
Federal Supply Class:
5315
National Item Identification Number:
012268515
Description:
PIN,STRAIGHT,HEADLESS
Detail:
A headless, cylindrically-shaped item having a straight, smooth, solid body, with or without a drilled hole(s). It has an outside diameter equal to or less than its length. Its length must not exceed twelve inches (304 MM); for items whose length exceeds twelve inches (304 MM); see ROD, STRAIGHT, HEADLESS. It is used for aligning or transfer of torque and/or thrust, by fitting into corresponding holes of another item. See also PIN, STRAIGHT, THREADED.
|
Manufacturer Information:
| 2042-245 | 13002 | GOODRICH CORPORATION | | 2042-245 | 45934 | ONTIC ENGINEERING & MANUFACTURING, INC |
|
Techincal Specification:
| MATERIAL | STEEL COMP 4330 OVERALL | | MATERIAL DOCUMENT AND CLASSIFICATION | GM1010,FSCM 13002 MFR REF SINGLE MATERIAL RESPONSE OVERALL | | HARDNESS RATING | 46.0 ROCKWELL C MINIMUM AND | | 48.0 ROCKWELL C MAXIMUM OVERALL | | FIRST END STYLE | CHAMFERED AND COUNTERSUNK | | FIRST END TAPER LENGTH | 0.060 INCHES NOMINAL | | FIRST END COUNTERSINK DIAMETER | 0.880 INCHES NOMINAL | | FIRST END TAPER ANGLE | 30.0 DEGREES NOMINAL | | FIRST END COUNTERSINK ANGLE | 60.0 DEGREES NOMINAL | | SECOND END RELATIONSHIP WITH FIRST END | NOT IDENTICAL | | SECOND END STYLE | CHAMFERED AND COUNTERBORED | | SECOND END TAPER LENGTH | 0.060 INCHES NOMINAL | | SECOND END COUNTERBORE DIAMETER | 1.000 INCHES MINIMUM AND | | 1.030 INCHES MAXIMUM | | SECOND END COUNTERBORE DEPTH | 1.120 INCHES NOMINAL | | SECOND END TAPER ANGLE | 30.0 DEGREES NOMINAL | | HOLE ARRANGEMENT STYLE | DRILLED THRU CENTER | | FIRST HOLE DIAMETER | 0.500 INCHES NOMINAL | | PIN OVERALL LENGTH | 7.500 INCHES MINIMUM AND | | 7.530 INCHES MAXIMUM | | PIN OVERALL DIAMETER | 1.4980 INCHES MINIMUM AND | | 1.4990 INCHES MAXIMUM | | CRITICALITY CODE JUSTIFICATION | ACHU | | THE MANUFACTURERS DATA | | | MANUFACTURERS CODE | 45934 | | DESIGN CONTROL REFERENCE | 2042-245 |
|
|