|
|
|
National Stock Number:
5315-01-228-4885
Federal Supply Class:
5315
National Item Identification Number:
012284885
Description:
PIN,STRAIGHT,HEADLESS
Detail:
A headless, cylindrically-shaped item having a straight, smooth, solid body, with or without a drilled hole(s). It has an outside diameter equal to or less than its length. Its length must not exceed twelve inches (304 MM); for items whose length exceeds twelve inches (304 MM); see ROD, STRAIGHT, HEADLESS. It is used for aligning or transfer of torque and/or thrust, by fitting into corresponding holes of another item. See also PIN, STRAIGHT, THREADED.
|
Manufacturer Information:
| 227B7103 | 05606 | GENERAL DYNAMICS-OTS, INC. |
|
Techincal Specification:
| MATERIAL | STEEL COMP 410 OR | | STEEL COMP 416 OVERALL | | MATERIAL DOCUMENT AND CLASSIFICATION | 66 FED STD ALL MATERIAL RESPONSES OVERALL | | SURFACE TREATMENT | PASSIVATE OVERALL | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL | | HARDNESS RATING | 36.0 ROCKWELL C MINIMUM AND | | 42.0 ROCKWELL C MAXIMUM OVERALL | | FIRST END STYLE | CHAMFERED | | FIRST END TAPER LENGTH | 0.094 INCHES MINIMUM AND | | 0.250 INCHES MAXIMUM | | FIRST END TAPER ANGLE | 25.0 DEGREES NOMINAL | | SECOND END RELATIONSHIP WITH FIRST END | NOT IDENTICAL | | SECOND END STYLE | CHAMFERED W/THRU HOLE | | SECOND END TAPER LENGTH | 0.094 INCHES MINIMUM AND | | 0.250 INCHES MAXIMUM | | SECOND END TAPER ANGLE | 20.0 DEGREES MINIMUM AND | | 30.0 DEGREES MAXIMUM | | SURFACE FINISH | 16.0 MICROINCHES OVERALL | | PIN OVERALL LENGTH | 2.490 INCHES MINIMUM AND | | 2.510 INCHES MAXIMUM | | PIN OVERALL DIAMETER | 0.7501 INCHES MINIMUM AND | | 0.7503 INCHES MAXIMUM | | SPECIAL FEATURES | END OF PIN HAS A DRILLED HOLE 0.410-0.510 IN DEEP,THREADED HOLE .250-UNF-2B,MADE FR0M MS16555,SURFACE FINISH FOR HOLE 125 MICROINCHES |
|
|