| UNDER HEAD LENGTH | 1.070 INCHES NOMINAL |
| DIAMETER | 0.371 INCHES MINIMUM AND |
| 0.373 INCHES MAXIMUM |
| HEAD STYLE | PAN NO. 2 (R1 NOT REQUIRED IN ITEM DESCRIPTION) |
| STYLE DESIGNATOR | STRAIGHT |
| MATERIAL | STEEL COMP 1010 OR |
| STEEL COMP 1012 OR |
| STEEL COMP 1015 OR |
| STEEL COMP 1016 OR |
| STEEL COMP 1017 OR |
| STEEL COMP 1018 OR |
| STEEL COMP 1019 OR |
| STEEL COMP 1020 OVERALL |
| MATERIAL DOCUMENT AND CLASSIFICATION | ASTM A576 ASSN STD 1ST MATERIAL RESPONSE OR |
| ASTM A108 ASSN STD 1ST MATERIAL RESPONSE OR |
| ASTM A576 ASSN STD 2ND MATERIAL RESPONSE OR |
| ASTM A576 ASSN STD 3RD MATERIAL RESPONSE OR |
| ASTM A108 ASSN STD 3RD MATERIAL RESPONSE OR |
| ASTM A576 ASSN STD 4TH MATERIAL RESPONSE OR |
| ASTM A108 ASSN STD 4TH MATERIAL RESPONSE OR |
| ASTM A576 ASSN STD 5TH MATERIAL RESPONSE OR |
| ASTM A108 ASSN STD 5TH MATERIAL RESPONSE OR |
| ASTM A576 ASSN STD 6TH MATERIAL RESPONSE OR |
| ASTM A108 ASSN STD 6TH MATERIAL RESPONSE OR |
| ASTM A576 ASSN STD 7TH MATERIAL RESPONSE OR |
| ASTM A108 ASSN STD 7TH MATERIAL RESPONSE OR |
| ASTM A576 ASSN STD 8TH MATERIAL RESPONSE OR |
| ASTM A108 ASSN STD 8TH MATERIAL RESPONSE OVERALL |
| SURFACE TREATMENT | CADMIUM AND |
| CHROMATE OVERALL |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TY 2,CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| CHAMFER LENGTH | 0.080 INCHES NOMINAL |
| PIN CHAMFER ANGLE | 15.0 DEGREES NOMINAL |
| PIN HEAD DIAMETER | 0.500 INCHES NOMINAL |
| HEIGHT | 0.090 INCHES NOMINAL |
| HOLE ARRANGEMENT STYLE | ONE END DRILLED |
| FIRST HOLE DIAMETER | 0.116 INCHES MINIMUM AND |
| 0.136 INCHES MAXIMUM |
| DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | 0.658 INCHES NOMINAL |