|
|
|
National Stock Number:
5315-01-234-9528
Federal Supply Class:
5315
National Item Identification Number:
012349528
Description:
PIN,SHOULDER,HEADLESS
Detail:
A cylindrically-shaped headless item, having a shank at one or both ends. It is used for aligning, fastening, or transfer of torque and/or thrust by fitting into corresponding holes of another item. It may be threaded on one end.
|
Manufacturer Information:
| 1353AS166-1 | 12758 | WARREN MACHINE CO INC | | 1353AS166-1 | 30003 | NAVAL AIR SYSTEMS COMMAND MANAGED ORIGINAL DESIGN ACTIVITY NOT MATERIAL/PARTS SUPPLIER |
|
Techincal Specification:
| MATERIAL | STEEL COMP 1018 OVERALL | | MATERIAL DOCUMENT AND CLASSIFICATION | ASTM A108 ASSN STD SINGLE MATERIAL RESPONSE OVERALL | | SURFACE TREATMENT | CADMIUM OR | | ZINC OVERALL | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TY1 CL3 FED SPEC 1ST TREATMENT RESPONSE OR | | ASTM B633,TY1 SC1 ASSN STD 2ND TREATMENT RESPONSE OVERALL | | STYLE DESIGNATOR | SHOULDER | | SHOULDER DIAMETER | 0.864 INCHES MINIMUM AND | | 0.869 INCHES MAXIMUM | | OVERALL LENGTH | 2.150 INCHES NOMINAL | | FIRST STEP DIAMETER | 0.746 INCHES MINIMUM AND | | 0.748 INCHES MAXIMUM | | FIRST STEP LENGTH | 0.215 INCHES MINIMUM AND | | 0.220 INCHES MAXIMUM | | SECOND STEP DIAMETER | 0.666 INCHES MINIMUM AND | | 0.668 INCHES MAXIMUM | | SECOND STEP LENGTH | 0.535 INCHES MINIMUM AND | | 0.545 INCHES MAXIMUM | | THIRD STEP DIAMETER | 0.434 INCHES MINIMUM AND | | 0.436 INCHES MAXIMUM | | THIRD STEP LENGTH | 0.835 INCHES MINIMUM AND | | 0.850 INCHES MAXIMUM | | FIRST END STYLE | OVAL | | SECOND END RELATIONSHIP WITH FIRST END | NOT IDENTICAL | | SECOND END STYLE | SLOTTED | | SECOND END SLOT DEPTH | 0.120 INCHES NOMINAL | | SECOND END SLOT WIDTH | 0.130 INCHES NOMINAL | | FIRST END LOCATION | SHOULDER END | | INTERNAL DRIVE STYLE | SLOT | | THREAD SERIES DESIGNATOR | UNF | | NOMINAL THREAD SIZE | 0.437 INCHES | | THREAD CLASS | 3A | | THREAD DIRECTION | RIGHT-HAND | | THREAD LENGTH | 0.475 INCHES MINIMUM AND | | 0.525 INCHES MAXIMUM | | HOLE ARRANGEMENT STYLE | ONE END DRILLED | | FIRST HOLE DIAMETER | 0.106 INCHES MINIMUM AND | | 0.110 INCHES MAXIMUM | | DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | 0.170 INCHES NOMINAL | | SPECIAL FEATURES | HOLE LOCATED ON THREADED END |
|
|