| FIRST END STYLE | CHAMFERED |
| FIRST END TAPER ANGLE | 45.0 DEGREES NOMINAL |
| FIRST END TAPER LENGTH | 0.047 INCHES NOMINAL |
| FIRST HOLE DIAMETER | 0.062 INCHES MINIMUM AND 0.078 INCHES MAXIMUM |
| FIRST STEP LENGTH | 0.062 INCHES NOMINAL |
| FIRST STEP DIAMETER | 0.485 INCHES MINIMUM AND 0.515 INCHES MAXIMUM |
| HEAD STYLE | DOUBLE CHAMFER |
| HEIGHT | 0.110 INCHES MINIMUM AND 0.140 INCHES MAXIMUM |
| HOLE ARRANGEMENT STYLE | DRILLED THRU CENTER |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-763 COND A FED SPEC SINGLE MATERIAL RESPONSE OVERALL |
| MATERIAL | STEEL COMP 304 OVERALL |
| PIN HEAD DIAMETER | 0.735 INCHES MINIMUM AND 0.765 INCHES MAXIMUM |
| SECOND STEP LENGTH | 1.672 INCHES MINIMUM AND 1.703 INCHES MAXIMUM |
| SECOND STEP DIAMETER | 0.183 INCHES MINIMUM AND 0.185 INCHES MAXIMUM |
| SPECIAL FEATURES | UNDERCUT BETWEEN FIRST AND SECOND STEP 0.047 INCH MIN 0.078 INCH MAX WIDTH 0.141 INCH MIN 0.172 INCH MAX DIAMETER |
| STYLE DESIGNATOR | SHOULDER |
| SURFACE FINISH | 63.0 MICROINCHES OUTSIDE DIAMETER |
| UNDER HEAD LENGTH | 1.797 INCHES MINIMUM AND 1.827 INCHES MAXIMUM |