|
|
|
National Stock Number:
5315-01-274-4566
Federal Supply Class:
5315
National Item Identification Number:
012744566
Description:
PIN,STRAIGHT,HEADLESS
Detail:
A headless, cylindrically-shaped item having a straight, smooth, solid body, with or without a drilled hole(s). It has an outside diameter equal to or less than its length. Its length must not exceed twelve inches (304 MM); for items whose length exceeds twelve inches (304 MM); see ROD, STRAIGHT, HEADLESS. It is used for aligning or transfer of torque and/or thrust, by fitting into corresponding holes of another item. See also PIN, STRAIGHT, THREADED.
|
Manufacturer Information:
| 750396-1 | 80249 | BAE SYSTEMS INFORMATION AND ELECTRONIC SYSTEMS INTEGRATION INC. |
|
Techincal Specification:
| MATERIAL | STEEL COMP 304 OVERALL | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-763 COND A FED SPEC SINGLE MATERIAL RESPONSE OVERALL | | SURFACE TREATMENT | PASSIVATE OVERALL | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL | | FIRST END STYLE | COUNTERSUNK | | FIRST END COUNTERSINK DIAMETER | 0.250 INCHES NOMINAL | | FIRST END COUNTERSINK ANGLE | 90.0 DEGREES NOMINAL | | SECOND END RELATIONSHIP WITH FIRST END | NOT IDENTICAL | | SECOND END STYLE | SQUARE | | HOLE ARRANGEMENT STYLE | BOTH END DRILLED | | FIRST HOLE DIAMETER | 0.086 INCHES NOMINAL | | SECOND HOLE DIAMETER | 0.086 INCHES NOMINAL | | DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | 0.480 INCHES NOMINAL | | CENTER TO CENTER DISTANCE BETWEEN HOLES | 0.180 INCHES NOMINAL | | PIN OVERALL LENGTH | 1.040 INCHES NOMINAL | | PIN OVERALL DIAMETER | 0.3210 INCHES MINIMUM AND | | 0.3260 INCHES MAXIMUM | | SPECIAL FEATURES | OPPOSITE COUNTERSUNK END IS BEVELING 52 DEGREE; BOTH HOLES THREADED 2-56 UNC-2B |
|
|