|
|
|
National Stock Number:
5315-01-275-4641
Federal Supply Class:
5315
National Item Identification Number:
012754641
Description:
PIN,ECCENTRIC
Detail:
A HEADED, CYLINDRICALLY-SHAPED METAL ITEM HAVING A SHANK AND/OR SHOULDER OFFSET FROM THE GEOMETRIC CENTER OF THE HEAD. IF SHOULDERED, A PORTION OF THE SHANK AND/OR SHOULDER MAY BE CONCENTRIC WITH THE HEAD.
|
Manufacturer Information:
| 4F53722-103A | 98897 | LOCKHEED MARTIN CORP |
|
Techincal Specification:
| FIRST STEP DIAMETER | 0.8097 INCHES MINIMUM AND 0.8105 INCHES MAXIMUM | | FIRST STEP LENGTH | 0.350 INCHES NOMINAL | | HEAD STYLE | FLAT CHAMFER | | HEIGHT | 0.060 INCHES NOMINAL | | OVERALL LENGTH | 1.812 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | ST-05-602 ASSN STD SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | STEEL COMP XM-13 OVERALL | | NUMERIC DESIGNATION OF STEP ECCENTRIC TO HEAD | 1 AND 2 | | OFFSET DISTANCE BETWEEN GEOMETRIC CENTER OF HEAD AND CENTERLINE OF SHANK/SHOULDER | 0.2938 INCHES NOMINAL | | PIN HEAD DIAMETER | 0.937 INCHES NOMINAL | | SECOND STEP LENGTH | 0.950 INCHES NOMINAL | | SECOND STEP DIAMETER | 0.670 INCHES MINIMUM AND 0.674 INCHES MAXIMUM | | SPECIAL FEATURES | HEAD HAS 0.030X45 DEGREES CHAMFER. THERE IS A RADIUS OF 0.010 INCHES UNDER THE HEAD,0.040 INCHES UNDER THE FIRST AND SECOND STEPS. THE PIN IS HOLLOW AND HAS A 0.031 INCH RADIUS IN HOLETHROUGH THE HEAD | | STYLE DESIGNATOR | ECCENTRIC | | THIRD STEP DIAMETER | 0.4974 INCHES MINIMUM AND 0.4980 INCHES MAXIMUM | | THIRD STEP LENGTH | 0.452 INCHES NOMINAL |
|
|