| CRITICALITY CODE JUSTIFICATION | FEAT AND STYL |
| DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | 1.500 INCHES NOMINAL |
| FIRST END STYLE | CHAMFERED |
| FIRST END TAPER ANGLE | 45.0 DEGREES NOMINAL |
| FIRST END TAPER LENGTH | 0.047 INCHES MINIMUM AND 0.077 INCHES MAXIMUM |
| FIRST END LOCATION | LONG END |
| FIRST HOLE DIAMETER | 0.2495 INCHES MINIMUM AND 0.2500 INCHES MAXIMUM |
| HOLE ARRANGEMENT STYLE | ONE END DRILLED |
| OVERALL LENGTH | 3.735 INCHES MINIMUM AND 3.765 INCHES MAXIMUM |
| MATERIAL DOCUMENT AND CLASSIFICATION | ASTM A582 COND A ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| MATERIAL | STEEL COMP 303 OVERALL |
| SECOND END RELATIONSHIP WITH FIRST END | NOT IDENTICAL |
| SECOND END STYLE | CHAMFERED |
| SECOND END TAPER ANGLE | 15.0 DEGREES NOMINAL |
| SECOND END TAPER LENGTH | 0.172 INCHES MINIMUM AND 0.202 INCHES MAXIMUM |
| SECOND SHANK DIAMETER | 0.750 INCHES NOMINAL |
| SECOND SHANK LENGTH | 1.720 INCHES MINIMUM AND 1.780 INCHES MAXIMUM |
| SHANK DIAMETER | 0.750 INCHES NOMINAL |
| SHANK LENGTH | 1.173 INCHES MINIMUM AND 1.203 INCHES MAXIMUM |
| SHOULDER DIAMETER | 1.740 INCHES MINIMUM AND 1.744 INCHES MAXIMUM |
| SPECIAL FEATURES | ITEM IS A PRECISION PART W/CRITICAL FIT APPLICATION,REFER TO DRAWING WHEN MANUFACTURING ITEM |
| STYLE DESIGNATOR | SHOULDER |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-35 TY4 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| SURFACE TREATMENT | PASSIVATE OVERALL |