| UNDER HEAD LENGTH | 1.881 INCHES MINIMUM AND |
| 1.901 INCHES MAXIMUM |
| DIAMETER | 0.154 INCHES MINIMUM AND |
| 0.156 INCHES MAXIMUM |
| HEAD STYLE | FLAT |
| STYLE DESIGNATOR | STRAIGHT |
| MATERIAL | STEEL COMP 4037 OR |
| STEEL COMP 4130 OR |
| STEEL COMP 8630 OR |
| STEEL COMP 8740 OVERALL |
| MATERIAL DOCUMENT AND CLASSIFICATION | MAS6300 UNS G40370 ASSN STD 1ST MATERIAL RESPONSE OR |
| MIL-S-6758 UNS G41300 MIL SPEC 2ND MATERIAL RESPONSE OR |
| MIL-S-6050 UNS G86300 MIL SPEC 3RD MATERIAL RESPONSE OR |
| MIL-S-6050 UNS G87400 MIL SPEC 4TH MATERIAL RESPONSE OVERALL |
| SURFACE TREATMENT | CADMIUM AND |
| CHROMATE OVERALL |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TYPE 2,CLASS 2 FED SPEC ALL TREATMENT RESPONSES OVERALL |
| HARDNESS RATING | 26.5 ROCKWELL C MINIMUM AND |
| 32.0 ROCKWELL C MAXIMUM OVERALL |
| SHEAR STRENGTH | 2860 DOUBLE POUNDS PER SQUARE INCH |
| CHAMFER LENGTH | 0.046 INCHES NOMINAL |
| PIN CHAMFER ANGLE | 15.0 DEGREES NOMINAL |
| PIN HEAD DIAMETER | 0.266 INCHES MINIMUM AND |
| 0.297 INCHES MAXIMUM |
| HEIGHT | 0.046 INCHES NOMINAL |
| HOLE ARRANGEMENT STYLE | ONE END DRILLED |
| FIRST HOLE DIAMETER | 0.060 INCHES MINIMUM AND |
| 0.080 INCHES MAXIMUM |
| DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | 1.744 INCHES MINIMUM AND |
| 1.764 INCHES MAXIMUM |
| SUPPLEMENTARY FEATURES | ACFT CLEVISES,ROD ENDS AND SHACKLES APPL |
| SPECIFICATION/STANDARD DATA | 96906-MS20392 GOVERNMENT STANDARD |