|
|
|
National Stock Number:
5315-01-282-8269
Federal Supply Class:
5315
National Item Identification Number:
012828269
Description:
PIN,SHOULDER,HEADLESS
Detail:
A cylindrically-shaped headless item, having a shank at one or both ends. It is used for aligning, fastening, or transfer of torque and/or thrust by fitting into corresponding holes of another item. It may be threaded on one end.
|
Manufacturer Information:
| 5813708-117 | 88277 | THE BOEING COMPANY |
|
Techincal Specification:
| CENTER TO CENTER DISTANCE BETWEEN HOLES | 0.6245 INCHES MINIMUM AND 0.6250 INCHES MAXIMUM | | DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | 0.141 INCHES NOMINAL | | FIRST END LOCATION | THREADED END | | FIRST END STYLE | CHAMFERED | | FIRST END TAPER ANGLE | 45.0 DEGREES NOMINAL | | FIRST END TAPER LENGTH | 0.062 INCHES NOMINAL | | FIRST HOLE DIAMETER | 0.187 INCHES NOMINAL | | FIRST STEP LENGTH | 4.000 INCHES NOMINAL | | FIRST STEP DIAMETER | 1.250 INCHES NOMINAL | | HOLE ARRANGEMENT STYLE | BOTH END DRILLED | | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-6758 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | STEEL COMP 4130 OVERALL | | NOMINAL THREAD SIZE | 0.625 INCHES | | SECOND END STYLE | OVAL | | SECOND END OUTER RADIUS | 0.688 INCHES NOMINAL | | SECOND END RELATIONSHIP WITH FIRST END | NOT IDENTICAL | | SECOND HOLE DIAMETER | 5.032 INCHES NOMINAL | | SECOND STEP DIAMETER | 0.8105 INCHES MINIMUM AND 0.8115 INCHES MAXIMUM | | SECOND STEP LENGTH | 1.032 INCHES NOMINAL | | STYLE DESIGNATOR | SHOULDER | | THIRD STEP DIAMETER | 0.625 INCHES NOMINAL | | THIRD STEP LENGTH | 0.875 INCHES NOMINAL | | THREAD CLASS | 3A | | THREAD DIRECTION | RIGHT-HAND | | THREAD LENGTH | 0.764 INCHES NOMINAL | | THREAD SERIES DESIGNATOR | UNF |
|
|