|
|
|
National Stock Number:
5315-01-284-7070
Federal Supply Class:
5315
National Item Identification Number:
012847070
Description:
PIN,STRAIGHT,HEADLESS
Detail:
A headless, cylindrically-shaped item having a straight, smooth, solid body, with or without a drilled hole(s). It has an outside diameter equal to or less than its length. Its length must not exceed twelve inches (304 MM); for items whose length exceeds twelve inches (304 MM); see ROD, STRAIGHT, HEADLESS. It is used for aligning or transfer of torque and/or thrust, by fitting into corresponding holes of another item. See also PIN, STRAIGHT, THREADED.
|
Manufacturer Information:
| 227B7321-9 | 05606 | GENERAL DYNAMICS-OTS, INC. |
|
Techincal Specification:
| FIRST END TAPER ANGLE | 45.0 DEGREES NOMINAL | | FIRST END TAPER LENGTH | 0.040 INCHES MINIMUM AND 0.080 INCHES MAXIMUM | | FIRST END STYLE | CHAMFERED | | HARDNESS RATING | 28.0 ROCKWELL C MINIMUM OVERALL AND 38.0 ROCKWELL C MAXIMUM OVERALL | | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5732 A-286 ASSN STD SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | IRON ALLOY 660 OVERALL | | PIN OVERALL DIAMETER | 0.4690 INCHES MINIMUM AND 0.4692 INCHES MAXIMUM | | PIN OVERALL LENGTH | 2.340 INCHES MINIMUM AND 2.360 INCHES MAXIMUM | | PROPRIETARY CHARACTERISTICS | PACS | | SECOND END STYLE | CHAMFERED W/THRU HOLE | | SECOND END TAPER ANGLE | 45.0 DEGREES NOMINAL | | SECOND END TAPER LENGTH | 0.040 INCHES MINIMUM AND 0.080 INCHES MAXIMUM | | SECOND END RELATIONSHIP WITH FIRST END | NOT IDENTICAL | | SPECIAL FEATURES | END OF PIN HAS A DRILLED HOLE,THREADED 0.250 IN. 28UNF-2B,DEPTH OF HOLE 0.410 IN. MIN TO 0.610 IN. MAX | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-STD-171 MIL STD SINGLE TREATMENT RESPONSE OVERALL | | SURFACE TREATMENT | PASSIVATE OVERALL |
|
|