|
|
|
National Stock Number:
5315-01-285-7796
Federal Supply Class:
5315
National Item Identification Number:
012857796
Description:
PIN,SHOULDER,HEADLESS
Detail:
A cylindrically-shaped headless item, having a shank at one or both ends. It is used for aligning, fastening, or transfer of torque and/or thrust by fitting into corresponding holes of another item. It may be threaded on one end.
|
Manufacturer Information:
| 1479AS106-1 | 30003 | NAVAL AIR SYSTEMS COMMAND MANAGED ORIGINAL DESIGN ACTIVITY NOT MATERIAL/PARTS SUPPLIER | | 62A122B8 | 75245 | KELL-STROM TOOL INTERNATIONAL, INC. |
|
Techincal Specification:
| CENTER TO CENTER DISTANCE BETWEEN HOLES | 1.625 INCHES NOMINAL | | DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | 2.031 INCHES NOMINAL | | FIRST END LOCATION | SHOULDER END | | FIRST END STYLE | CHAMFERED | | FIRST END TAPER ANGLE | 45.0 DEGREES NOMINAL | | FIRST END TAPER LENGTH | 0.060 INCHES NOMINAL | | FIRST HOLE DIAMETER | 0.390 INCHES NOMINAL | | FIRST STEP LENGTH | 0.750 INCHES NOMINAL | | FIRST STEP DIAMETER | 1.213 INCHES MINIMUM AND 1.218 INCHES MAXIMUM | | HOLE ARRANGEMENT STYLE | BOTH END DRILLED | | OVERALL LENGTH | 5.750 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5643 ASSN STD SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | STEEL COMP 630 OVERALL | | SECOND END STYLE | CHAMFERED | | SECOND END TAPER LENGTH | 0.750 INCHES NOMINAL | | SECOND END RELATIONSHIP WITH FIRST END | NOT IDENTICAL | | SECOND HOLE DIAMETER | 0.390 INCHES NOMINAL | | SECOND STEP DIAMETER | 1.235 INCHES MINIMUM AND 1.240 INCHES MAXIMUM | | SECOND STEP LENGTH | 2.750 INCHES NOMINAL | | SHOULDER DIAMETER | 1.588 INCHES MINIMUM AND 1.593 INCHES MAXIMUM | | STYLE DESIGNATOR | SHOULDER | | SURFACE FINISH | 63.0 MICROINCHES OUTSIDE DIAMETER | | THIRD STEP DIAMETER | 0.698 INCHES MINIMUM AND 0.703 INCHES MAXIMUM | | THIRD STEP LENGTH | 1.250 INCHES NOMINAL |
|
|