| CENTER TO CENTER DISTANCE BETWEEN HOLES | 0.459 INCHES NOMINAL |
| CHAMFER LENGTH | 0.078 INCHES NOMINAL |
| DIAMETER | 0.371 INCHES MINIMUM AND 0.373 INCHES MAXIMUM |
| DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | 0.135 INCHES NOMINAL |
| FIRST HOLE DIAMETER | 0.106 INCHES NOMINAL |
| HEAD STYLE | PAN NO. 2 (R1 NOT REQUIRED IN ITEM DESCRIPTION) |
| HEIGHT | 0.062 INCHES NOMINAL |
| HOLE ARRANGEMENT STYLE | BOTH END DRILLED |
| MATERIAL DOCUMENT AND CLASSIFICATION | AMS 6300 ASSN STD 1ST MATERIAL RESPONSE OR MIL-S-6758 MIL SPEC 2ND MATERIAL RESPONSE OR MIL-S-6050 MIL SPEC 3RD MATERIAL RESPONSE OVERALL |
| MATERIAL | STEEL COMP 4037 OR STEEL COMP 4130 OR STEEL COMP 8630 OVERALL |
| PIN HEAD DIAMETER | 0.500 INCHES NOMINAL |
| PIN CHAMFER ANGLE | 15.0 DEGREES NOMINAL |
| SECOND HOLE DIAMETER | 0.077 INCHES MINIMUM AND 0.082 INCHES MAXIMUM |
| SPECIAL FEATURES | W/THREE ADDITIONAL 0.077 IN. MIN 0.082 IN. MAX DIA HOLES ON AXIAL CENTERLINE AT VARYING DISTANCES; 0.092 IN. MIN 0.097 IN. MAX DIA HOLE DRILLED IN HEAD 1.910 IN. NOM DP AND COUNTERBORE W/0.250-28 UNF 2B THD 0.250 IN. NOM DP |
| STYLE DESIGNATOR | STRAIGHT |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416 TY2 CL2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| SURFACE TREATMENT | CADMIUM AND CHROMATE OVERALL |
| UNDER HEAD LENGTH | 2.282 INCHES NOMINAL |