|
|
|
National Stock Number:
5315-01-288-1037
Federal Supply Class:
5315
National Item Identification Number:
012881037
Description:
PIN,STRAIGHT,HEADLESS
Detail:
A headless, cylindrically-shaped item having a straight, smooth, solid body, with or without a drilled hole(s). It has an outside diameter equal to or less than its length. Its length must not exceed twelve inches (304 MM); for items whose length exceeds twelve inches (304 MM); see ROD, STRAIGHT, HEADLESS. It is used for aligning or transfer of torque and/or thrust, by fitting into corresponding holes of another item. See also PIN, STRAIGHT, THREADED.
|
Manufacturer Information:
| 2-435-018-291 | 63097 | VIKING PUMP, INC |
|
Techincal Specification:
| CENTER TO CENTER DISTANCE BETWEEN HOLES | 0.969 INCHES NOMINAL | | DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | 0.781 INCHES NOMINAL | | FIRST END STYLE | CHAMFERED | | FIRST END TAPER ANGLE | 15.0 DEGREES NOMINAL | | FIRST END TAPER LENGTH | 0.062 INCHES NOMINAL | | FIRST HOLE DIAMETER | 0.188 INCHES NOMINAL | | HOLE ARRANGEMENT STYLE | BOTH END DRILLED | | MATERIAL | STEEL OVERALL | | PIN OVERALL DIAMETER | 1.1245 INCHES MINIMUM AND 1.1250 INCHES MAXIMUM | | PIN OVERALL LENGTH | 2.120 INCHES MINIMUM AND 2.130 INCHES MAXIMUM | | SECOND END STYLE | CHAMFERED W/THRU HOLE | | SECOND END TAPER ANGLE | 15.0 DEGREES NOMINAL | | SECOND END TAPER LENGTH | 0.062 INCHES NOMINAL | | SECOND END RELATIONSHIP WITH FIRST END | NOT IDENTICAL | | SECOND HOLE DIAMETER | 0.188 INCHES NOMINAL | | SPECIAL FEATURES | LONGITUDINAL HOLE 0.344 INCH NOMINAL DIAMETER,1.875 INCH NOMINAL DEPTH WITH 0.125 INCH NATIONAL PIPE THREAD FOR A GREASE FITTING; 0.188 INCH NOMINAL DIAMETER LUBRICATING HOLES ARE PERPENDICULAR AT 90 DEGREE ANGLE | | SURFACE FINISH | 32.0 MICROINCHES OUTSIDE DIAMETER |
|
|