| DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | 0.555 INCHES NOMINAL |
| FIRST END STYLE | CHAMFERED |
| FIRST END TAPER ANGLE | 45.0 DEGREES NOMINAL |
| FIRST END TAPER LENGTH | 0.060 INCHES NOMINAL |
| FIRST END LOCATION | BOTH ENDS |
| FIRST HOLE DIAMETER | 0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM |
| HOLE ARRANGEMENT STYLE | ONE END DRILLED |
| OVERALL LENGTH | 5.400 INCHES NOMINAL |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-225/6 TEMPER T351 FED SPEC SINGLE MATERIAL RESPONSE OVERALL |
| MATERIAL | ALUMINUM ALLOY 2024 OVERALL |
| SECOND END RELATIONSHIP WITH FIRST END | IDENTICAL |
| SHANK DIAMETER | 1.110 INCHES MINIMUM AND 1.120 INCHES MAXIMUM |
| SHANK LENGTH | 1.700 INCHES NOMINAL |
| SHOULDER DIAMETER | 1.250 INCHES NOMINAL |
| SPECIAL FEATURES | TWO SYMMETRICAL FLATS ON SHANK END 1.120 INCH NOMINAL LONG 0.750 INCH NOMINAL WIDTH ACROSS FLATS,PERPENDICULAR TO HOLE |
| STYLE DESIGNATOR | SHOULDER |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-A-8625,TY2 CL1 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL |
| SURFACE TREATMENT | ANODIZE OVERALL |