|
|
|
National Stock Number:
5315-01-292-6413
Federal Supply Class:
5315
National Item Identification Number:
012926413
Description:
PIN,SHOULDER,HEADLESS
Detail:
A cylindrically-shaped headless item, having a shank at one or both ends. It is used for aligning, fastening, or transfer of torque and/or thrust by fitting into corresponding holes of another item. It may be threaded on one end.
|
Manufacturer Information:
| 11A57002-005 | 10000 | MANEY AIRCRAFT, INC. | | 11A57002-005 | 43999 | THE BOEING COMPANY | | 11A57002-005 | 48458 | TOWER INDUSTRIES INC | | 11A57002-005 | 4N300 | RICMAR ENGINEERING INC | | 11A57002-005 | 60029 | WOODWARD HRT, INC. |
|
Techincal Specification:
| DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | 0.200 INCHES NOMINAL | | FIRST END STYLE | CHAMFERED | | FIRST END TAPER ANGLE | 45.0 DEGREES NOMINAL | | FIRST END LOCATION | SHORT SHANK END | | FIRST HOLE DIAMETER | 0.104 INCHES NOMINAL | | FIRST END TAPER LENGTH | 0.050 INCHES NOMINAL | | HOLE ARRANGEMENT STYLE | ONE END DRILLED | | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-C-24111 TYPE TWO,CONDITION TWO,FINISH A MIL SPEC SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | STEEL COMP 630 OVERALL | | OVERALL LENGTH | 3.510 INCHES NOMINAL | | SECOND END RELATIONSHIP WITH FIRST END | NOT IDENTICAL | | SECOND END STYLE | SQUARE | | SECOND SHANK DIAMETER | 0.235 INCHES MINIMUM AND 0.245 INCHES MAXIMUM | | SECOND SHANK LENGTH | 0.660 INCHES NOMINAL | | SHANK DIAMETER | 0.215 INCHES MINIMUM AND 0.225 INCHES MAXIMUM | | SHANK LENGTH | 2.060 INCHES NOMINAL | | SHOULDER DIAMETER | 0.373 INCHES MINIMUM AND 0.375 INCHES MAXIMUM | | STYLE DESIGNATOR | SHOULDER | | SURFACE FINISH | 63.0 MICROINCHES SHORT SHANK END | | SURFACE FINISH | 63.0 MICROINCHES SHOULDER OUTSIDE DIAMETER |
|
|