|
|
|
National Stock Number:
5315-01-293-5488
Federal Supply Class:
5315
National Item Identification Number:
012935488
Description:
PIN,STRAIGHT,HEADLESS
Detail:
A headless, cylindrically-shaped item having a straight, smooth, solid body, with or without a drilled hole(s). It has an outside diameter equal to or less than its length. Its length must not exceed twelve inches (304 MM); for items whose length exceeds twelve inches (304 MM); see ROD, STRAIGHT, HEADLESS. It is used for aligning or transfer of torque and/or thrust, by fitting into corresponding holes of another item. See also PIN, STRAIGHT, THREADED.
|
Manufacturer Information:
| 6098128 | 53711 | NAVAL SEA SYSTEMS COMMAND |
|
Techincal Specification:
| MATERIAL | STEEL COMP 440B OR | | STEEL COMP 440C OVERALL | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-763,CONDITION A FED SPEC ALL MATERIAL RESPONSES OVERALL | | SURFACE TREATMENT | PASSIVATE OVERALL | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-35,TYPE IV FED SPEC SINGLE TREATMENT RESPONSE OVERALL | | HARDNESS RATING | 50.0 ROCKWELL C MINIMUM AND | | 55.0 ROCKWELL C MAXIMUM OVERALL | | FIRST END STYLE | SLOTTED | | FIRST END SLOT DEPTH | 0.120 INCHES NOMINAL | | FIRST END SLOT WIDTH | 0.120 INCHES NOMINAL | | SECOND END RELATIONSHIP WITH FIRST END | NOT IDENTICAL | | SECOND END STYLE | SQUARE INTERNALLY THREADED | | HOLE ARRANGEMENT STYLE | ONE END DRILLED | | FIRST HOLE DIAMETER | 0.187 INCHES NOMINAL | | DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | 3.210 INCHES NOMINAL | | SURFACE FINISH | 32.0 MICROINCHES OUTSIDE DIAMETER | | PIN OVERALL LENGTH | 6.000 INCHES NOMINAL | | PIN OVERALL DIAMETER | 2.4940 INCHES MINIMUM AND | | 2.4950 INCHES MAXIMUM | | SPECIAL FEATURES | LONGITUDINAL HOLE 0.187 INCH NOMINAL DIAMETER 3.300 INCH NOMINAL DEPTH,WITH 0.250-28 UNIFIED NATIONAL FINE 2B INTERNAL FULL THREAD 0.190 INCH MINIMUM LONG,LOCATED ON AXIAL CENTER OPPOSITE SLOTTED END; CHAMFER 0.040 INCH NOMINAL LONG 45.0 DEGREE ON BOTH ENDS; SINGULAR SLOT 0.290 INCH NOMINAL WIDE 0.400 INCH NOMINAL DEEP,PARALLEL TO AND 0.260 INCH NOMINAL DISTANCE FROM PIN SLOTTED END |
|
|