|
|
|
National Stock Number:
5315-01-294-2314
Federal Supply Class:
5315
National Item Identification Number:
012942314
Description:
PIN,STRAIGHT,HEADED
Detail:
A headed, cylindrically-shaped item having a solid shank for fitting into corresponding holes, used for aligning or fastening. It may have welding projections. It also may contain holes drilled perpendicular to axial centerline. Excludes PIN, ECCENTRIC.
|
Manufacturer Information:
| 6602061 | 1YHH8 | JLG INDUSTRIES, INC. | | 6602061 | 3Y949 | TRAK INTERNATIONAL |
|
Techincal Specification:
| DIAMETER | 0.497 INCHES MINIMUM AND 0.499 INCHES MAXIMUM | | DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | 0.180 INCHES NOMINAL | | CHAMFER LENGTH | 0.060 INCHES NOMINAL | | FIRST HOLE DIAMETER | 0.187 INCHES NOMINAL | | HARDNESS RATING | 45.0 ROCKWELL C MINIMUM OVERALL AND 50.0 ROCKWELL C MAXIMUM OVERALL | | HEAD STYLE | FLAT | | HEIGHT | 0.125 INCHES NOMINAL | | HOLE ARRANGEMENT STYLE | ONE END DRILLED | | MATERIAL DOCUMENT AND CLASSIFICATION | AISI ASSN STD SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | STEEL COMP 4140 OVERALL | | PIN HEAD DIAMETER | 0.615 INCHES MINIMUM AND 0.630 INCHES MAXIMUM | | PIN CHAMFER ANGLE | 15.0 DEGREES NOMINAL | | PROPRIETARY CHARACTERISTICS | PACS | | SPECIAL FEATURES | PIN SHOULD BE GLASS BEAD BLAST AND OIL COAT AFTER HEAT TREATING; HARDEN TO SPECIFICATION 2113 CAGEC 3Y949 | | STYLE DESIGNATOR | STRAIGHT | | SURFACE FINISH | 63.0 MICROINCHES HEAD OUTSIDE DIAMETER | | UNDER HEAD LENGTH | 2.055 INCHES NOMINAL |
|
|