| DIAMETER | 0.7500 INCHES MINIMUM AND 0.7505 INCHES MAXIMUM |
| DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | 1.620 INCHES NOMINAL |
| FEATURES PROVIDED | CASEHARDENED |
| FIRST END LOCATION | UNTHREADED END |
| FIRST END STYLE | CHAMFERED |
| FIRST END TAPER ANGLE | 45.0 DEGREES NOMINAL |
| FIRST END TAPER LENGTH | 0.060 INCHES NOMINAL |
| FIRST HOLE DIAMETER | 0.120 INCHES NOMINAL |
| HARDNESS RATING | 57.0 ROCKWELL C MINIMUM AND 62.0 ROCKWELL C MAXIMUM OVERALL |
| HOLE ARRANGEMENT STYLE | ONE END DRILLED |
| OVERALL LENGTH | 2.880 INCHES NOMINAL |
| MATERIAL DOCUMENT AND CLASSIFICATION | ASTM A576 ASSN STD ALL MATERIAL RESPONSES OR ASTM A108 EXCEPT COMP 1023 ASSN STD ALL MATERIAL RESPONSES OVERALL |
| MATERIAL | STEEL COMP 1015 OR STEEL COMP 1016 OR STEEL COMP 1017 OR STEEL COMP 1018 OR STEEL COMP 1019 OR STEEL COMP 1020 OR STEEL COMP 1021 OR STEEL COMP 1022 OR STEEL COMP 1023 OR STEEL COMP 1025 OVERALL |
| SECOND END COUNTERBORE DEPTH | 1.750 INCHES NOMINAL |
| SECOND END COUNTERBORE DIAMETER | 0.120 INCHES NOMINAL |
| SECOND END STYLE | CHAMFERED AND COUNTERBORED |
| SECOND END TAPER ANGLE | 45.0 DEGREES NOMINAL |
| SECOND END TAPER LENGTH | 0.060 INCHES NOMINAL |
| SECOND END RELATIONSHIP WITH FIRST END | NOT IDENTICAL |
| SPECIAL FEATURES | TRANSVERSE KEYWAY 0.190 IN. LONG 0.188 IN. WIDE ON THREADED END,ALSO LONGITUDINAL HOLE ON SAME END 1.750 IN. LONG |
| STYLE DESIGNATOR | GROOVE |
| SURFACE FINISH | 32.0 MICROINCHES OUTSIDE DIAMETER |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | DOD-P-16232 TY M,CL 2 NATIONAL SPEC SINGLE TREATMENT RESPONSE OVERALL |
| SURFACE TREATMENT | PHOSPHATE MANGANESE OVERALL |
| UNDERCUT RADIUS | 0.090 INCHES NOMINAL |
| UNDERCUT WIDTH | 0.190 INCHES NOMINAL |